Influence of PLA Flowability and Talc Content on the Performance of Rigid TPS/PBS/PLA/Talc Blends
Polymers · 21.06.2026 · 18 (12) · 1544
DOI: 10.3390/polym18121544 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.06.2026. Verfasst von Cristina Martín-Poyo und 2 weiteren Autor:innen. Beteiligte Einrichtung: BZERO, Camino de Vera s/n, 46022 Burjassot, Valencia, Spain. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BZERO, MATS-Universitat de València.
Abstract (Originalsprache)
This study investigates the influence of PLA flowability and talc content on the performance of compostable thermoplastic starch/poly(butylene succinate) (TPS/PBS)-based systems for rigid applications. Different PLA grades with varying melt flow index (PLA23, PLA8 and PLA70) and talc contents (0, 5 and 10 wt%) were incorporated. Twelve formulations were compounded by twin-screw extrusion and processed by injection moulding. FTIR confirmed the coexistence of TPS, PBS and PLA phases without evidence of chemical interactions. Morphological analysis showed that PLA flowability plays a key role in phase distribution, with higher-flow PLA promoting improved dispersion and interfacial adhesion, while talc addition (5 and 10 wt%) increased structural heterogeneity; at higher loadings, particularly, DSC analysis revealed that talc acted as a nucleating agent for the PBS phase, increasing crystallisation temperatures from approximately 73 °C to 81 °C depending on formulation. Mechanical results showed that Young’s modulus increased from approximately 1.4 GPa to 2.7 GPa with decreasing PLA flowability and increasing talc content. Formulations containing low-flow PLA reached tensile strengths close to 32 MPa, although elongation at break decreased to values near 2%. In contrast, high-flow PLA formulations exhibited a more balanced mechanical response, with elongation values up to approximately 8%, associated with improved phase dispersion. Hybrid PLA systems showed intermediate behaviour, reaching elongations up to 22% while maintaining modulus values around 1.8 GPa. Talc provided additional reinforcement but reduced deformation capacity. HDT values remained relatively constant, indicating limited improvement in thermomechanical resistance despite increased stiffness. These results demonstrate that the combined control of PLA molecular characteristics and talc content enables tuning of the mechanical and thermomechanical performance of TPS/PBS/PLA/talc systems for rigid packaging applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- BZERO, Camino de Vera s/n, 46022 Burjassot, Valencia, Spain.
- Research Group in Materials Technology and Sustainability (MATS), Department of Chemical Engineering, School of Engineering, Universitat de València, Av. Universitat s/n, 46100 Burjassot, Valencia, Spain.
ORCID-Profile: Josep P Cerisuelo, Jose D Badia-Valiente
Förderung
- BZERO
- MATS-Universitat de València
Zitieren
APA
Martín-Poyo, C., Cerisuelo, J. P., & Badia-Valiente, J. D. (2026). Influence of PLA Flowability and Talc Content on the Performance of Rigid TPS/PBS/PLA/Talc Blends. Polymers, 18(12), 1544. https://doi.org/10.3390/polym18121544
Vancouver
Martín-Poyo C, Cerisuelo JP, Badia-Valiente JD. Influence of PLA Flowability and Talc Content on the Performance of Rigid TPS/PBS/PLA/Talc Blends. Polymers. 2026;18(12):1544. doi:10.3390/polym18121544
BibTeX
@article{MartnPoyo2026,
author = {Martín-Poyo, Cristina and Cerisuelo, Josep P and Badia-Valiente, Jose D},
title = {Influence of PLA Flowability and Talc Content on the Performance of Rigid TPS/PBS/PLA/Talc Blends},
journal = {Polymers},
year = {2026},
volume = {18},
number = {12},
pages = {1544},
doi = {10.3390/polym18121544}
}
EUVIMED