EUVIMEDEUVIMED entdecken
Crossref

Tailoring the Thermomechanical Properties of Talc‐Reinforced PLA/PBS Blends for Injection Molding Applications

Arif Enes Karaca, Alessandra Caggiano, Massimiliano Barletta

Journal of Applied Polymer Science · 05.09.2026 · 143 (33)

DOI: 10.1002/app.70961 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 02.06.2026. Verfasst von Arif Enes Karaca und 2 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a material selection framework for injection molding by systematically comparing two talc‐reinforced bio‐compounds with opposing compositional dominance. The compounds h‐PBS‐T15 and h‐PLA‐T15 (15 wt% talc) were comprehensively characterized via mechanical testing, thermal analysis, rheology, and FT‐IR. The results quantitatively demonstrate that the dominant polymer matrix dictates the final performance profile by governing the role of talc. The PBS‐dominated compound (h‐PBS‐T15) exhibited superior toughness (impact strength 63.4 kJ/m 2 ) and a higher heat deflection temperature (67.3°C). The PLA‐dominated compound (h‐PLA‐T15) provided a better stiffness‐flow balance (tensile modulus 341 MPa) and, critically, achieved a Vicat softening temperature (VST) of 105.7°C, matching the PBS‐based system due to talc's reinforcement. Both materials showed excellent injection molding processability. This work provides a quantitative design rule: select a PLA‐rich matrix for stiffness and flowability in complex, rigid parts, or a PBS‐rich matrix for toughness and heat resistance in durable, impact‐resistant components.

Zitieren

APA

Karaca, A. E., Caggiano, A., & Barletta, M. (2026). Tailoring the Thermomechanical Properties of Talc‐Reinforced PLA/PBS Blends for Injection Molding Applications. Journal of Applied Polymer Science, 143(33). https://doi.org/10.1002/app.70961

Vancouver

Karaca AE, Caggiano A, Barletta M. Tailoring the Thermomechanical Properties of Talc‐Reinforced PLA/PBS Blends for Injection Molding Applications. Journal of Applied Polymer Science. 2026;143(33). doi:10.1002/app.70961

BibTeX
@article{Karaca2026,
  author = {Karaca, Arif Enes and Caggiano, Alessandra and Barletta, Massimiliano},
  title = {Tailoring the Thermomechanical Properties of Talc‐Reinforced PLA/PBS Blends for Injection Molding Applications},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {33},
  doi = {10.1002/app.70961}
}
Kostenlos starten →