EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Analysis and Strain Monitoring of the Curing Process in Ring-Shaped CFRP Components

Yanhui Tian, Benjie Ding, Jianke Du, Minghua Zhang iD

Polymers · 10.06.2026 · 18 (12) · 1447

DOI: 10.3390/polym18121447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.06.2026. Verfasst von Yanhui Tian und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Major Research and Development Plan Project, Zhejiang Provincial Natural Science Foundation, Zhejiang Provincial Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-field coupled numerical analysis and strain monitoring experiments were conducted for the curing process of a ring-shaped CFRP component. The curing kinetics and mechanical properties of LD-2184 epoxy resin were characterized using non-isothermal DSC, tensile testing, and CTE measurements. The curing reaction follows a single-stage autocatalytic mechanism with an activation energy of 54.73 kJ·mol−1. A piecewise curing kinetics equation was established. The elastic modulus of the fully cured resin is 2.810 GPa, and the coefficient of thermal expansion is 6.060 × 10−5 K−1. Composite ring specimens were fabricated using a wet winding process. FBG sensors were embedded to monitor axial strain during curing. A coupled numerical model was developed that includes heat conduction, curing kinetics, and curing deformation. ABAQUS was used to simulate the curing process of the composite ring. The results show a temperature gradient within the filament-wound layer. Thermo-chemical strain is similar between inner and outer regions. Total strain varies along the thickness due to mold constraint. Residual stress is governed by resin chemical shrinkage and thermal contraction during cooling. The difference between measured and simulated strain is 7.15%, which supports the validity of the multi-field coupled curing model.

Schlagwörter

Stichwörter der Autor:innen

CFRPcure kineticscuring deformationmulti-field couplingnumerical simulationoptical fiber monitoring

Autor:innen und Institutionen

  • School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China.

ORCID-Profile: Minghua Zhang

Förderung

  • Ningbo Major Research and Development Plan Project
  • Zhejiang Provincial Natural Science Foundation
  • Zhejiang Provincial Natural Science Foundation of China

Zitieren

APA

Tian, Y., Ding, B., Du, J., & Zhang, M. (2026). Numerical Analysis and Strain Monitoring of the Curing Process in Ring-Shaped CFRP Components. Polymers, 18(12), 1447. https://doi.org/10.3390/polym18121447

Vancouver

Tian Y, Ding B, Du J, Zhang M. Numerical Analysis and Strain Monitoring of the Curing Process in Ring-Shaped CFRP Components. Polymers. 2026;18(12):1447. doi:10.3390/polym18121447

BibTeX
@article{Tian2026,
  author = {Tian, Yanhui and Ding, Benjie and Du, Jianke and Zhang, Minghua},
  title = {Numerical Analysis and Strain Monitoring of the Curing Process in Ring-Shaped CFRP Components},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1447},
  doi = {10.3390/polym18121447}
}
Kostenlos starten →