Numerical Analysis of Curing Residual Stress and Strain in NEPE Propellant Grain
Polymers · 17.02.2023 · 15 (4) · 1019
DOI: 10.3390/polym15041019 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.02.2023. Verfasst von Xiangyang Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In order to investigate the formation mechanism of the residual stress and residual strain in a nitrate ester plasticized polyether (NEPE) propellant grain during the curing and cooling process, the temperature, curing degree and stress/strain of the NEPE propellant grain during the curing and cooling process were analyzed via ABAQUS finite element software. The results indicate that there is a temperature gradient in the NEPE propellant grain during curing at 50 °C. The maximum temperature difference is about 5 °C and the maximum temperature is located on the center of propellant grain. At the end of curing, the temperature in the interior of the grain tends to be uniform. The curing degree in the NEPE propellant grain during the curing process has the same trend as temperature. The residual stress/strain of the NEPE propellant grain during the curing and cooling down processes are mainly composed of curing shrinkage stress/strain in the curing process and thermal stress/strain in the cooling down process. The curing shrinkage stress and strain in the curing process account for 19% and 31% of the whole process, respectively. The thermal stress and thermal strain in cooling down process account for 75% and 69% of the whole process, respectively. The thermal stress and thermal strain in the curing process can nearly be ignored. The residual stress and residual strain calculated by the traditional method is larger than that obtained in this paper. The maximum deviation of the residual stress and residual strain are about 8% and 17%, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechatronic Engineering, North University of China, Taiyuan 030051, China.
- School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China.
ORCID-Profile: Dongmo Zhou
Zitieren
APA
Liu, X., Xie, X., Zhou, D., & Wang, R. (2023). Numerical Analysis of Curing Residual Stress and Strain in NEPE Propellant Grain. Polymers, 15(4), 1019. https://doi.org/10.3390/polym15041019
Vancouver
Liu X, Xie X, Zhou D, Wang R. Numerical Analysis of Curing Residual Stress and Strain in NEPE Propellant Grain. Polymers. 2023;15(4):1019. doi:10.3390/polym15041019
BibTeX
@article{Liu2023,
author = {Liu, Xiangyang and Xie, Xuyuan and Zhou, Dongmo and Wang, Ruimin},
title = {Numerical Analysis of Curing Residual Stress and Strain in NEPE Propellant Grain},
journal = {Polymers},
year = {2023},
volume = {15},
number = {4},
pages = {1019},
doi = {10.3390/polym15041019}
}
EUVIMED