EUVIMEDEUVIMED entdecken
Crossref

Monitoring System for the Manufacturing Process of CFRP Structures

Antonio Grande Ferreiro, José Ignacio Alba Rodriguez, Montserrat Acebes, Darío Sánchez-Jimenez, Iñaki Gauna, José Javier Anaya, M Teresa Aguado, Sofía Aparicio Secanellas

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Antonio Grande Ferreiro und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aeronautic industry faces a critical challenge: achieving safe, reliable, and affordable air transport with near-zero emissions. The introduction of carbon fiber–reinforced polymers (CFRPs) has significantly reduced aircraft weight and, consequently, fuel consumption and CO₂ emissions. However, the long manufacturing cycles required for CFRP structures still limit their application in high-rate aircraft production. Addressing this limitation requires advanced manufacturing technologies that enable faster and more energy-efficient composite processing. This study presents the design and development of a monitoring system for studying and optimizing the CFRP curing process. The system integrates temperature and ultrasonic transmission measurements to provide real-time insight into the material’s internal state. Custom ultrasonic transducers, capable of operating up to 180 °C, were developed to track variations in ultrasonic propagation during curing. Experimental tests on CFRP specimens revealed that internal temperature distribution and ultrasonic parameters depend on the curing method and laminate configuration. Different ultrasonic techniques were evaluated to identify the most effective approach for correlating ultrasonic responses with the degree of cure. The proposed monitoring system enables adaptive control of the curing process, reducing energy consumption and cycle time while ensuring part quality in advanced composite manufacturing.

Zitieren

APA

Ferreiro, A. G., Rodriguez, J. I. A., Acebes, M., Sánchez-Jimenez, D., Gauna, I., Anaya, J. J., Aguado, M. T., & Secanellas, S. A. (2026). Monitoring System for the Manufacturing Process of CFRP Structures. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33122

Vancouver

Ferreiro AG, Rodriguez JIA, Acebes M, Sánchez-Jimenez D, Gauna I, Anaya JJ, et al. Monitoring System for the Manufacturing Process of CFRP Structures. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33122

BibTeX
@article{Ferreiro2026,
  author = {Ferreiro, Antonio Grande and Rodriguez, José Ignacio Alba and Acebes, Montserrat and Sánchez-Jimenez, Darío and Gauna, Iñaki and Anaya, José Javier and Aguado, M Teresa and Secanellas, Sofía Aparicio},
  title = {Monitoring System for the Manufacturing Process of CFRP Structures},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33122}
}
Kostenlos starten →