From Melt Processing to Composting: Solvent-Free Thermoplastic Starch/Polyvinyl Alcohol Blends with Tailored Structure and Performance
Polymers · 28.05.2026 · 18 (11) · 1333
DOI: 10.3390/polym18111333 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.05.2026. Verfasst von Franciszek Pawlak und 4 weiteren Autor:innen. Beteiligte Einrichtung: Instituto Universitario de Tecnología de Materiales, Universitat Politècnica de València, 03801 Alcoy, Alicante, Spain. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades, European Union “NextGenerationEU”/PRTR, Escuela Politécnica Nacional.
Abstract (Originalsprache)
Thermoplastic starch (TPS) and polyvinyl alcohol (PVA) blends were prepared over the full compositional range (0–100 wt% PVA) by solvent-free twin-screw extrusion and injection molding. This enabled a systematic evaluation of structure–performance–disintegration relationships under industrially relevant conditions. The blends exhibited clear composition-dependent trends in thermal and mechanical behavior. Increasing PVA content from 0 to 100 wt% raised the onset degradation temperature (T5%) from 160.5 °C to 290.5 °C and increased crystallinity from near zero to 12.24%. Mechanically, the response evolved from a rigid TPS-rich state to a ductile PVA-rich one. FTIR and SEM analyses indicated partial compatibility, with limited molecular-level interactions leading to morphologically homogeneous but only partially miscible blends. Under simulated composting conditions, all formulations showed substantial physical disintegration. PVA-rich blends (≥60 wt%) disintegrated rapidly (>80% mass loss within two days), primarily by dissolution rather than microbial degradation. Overall, this work provides a comprehensive, scalable assessment of solvent-free TPS/PVA blends, clarifies their limited compatibility under melt processing, and demonstrates how composition can be used to tailor structure, performance, and disintegration behavior across the full compositional range.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto Universitario de Tecnología de Materiales, Universitat Politècnica de València, 03801 Alcoy, Alicante, Spain.
- Centro de Investigaciones Aplicadas a Polímeros, Departamento de Ciencia de Alimentos y Biotecnología, Facultad de Ingeniería Química y Agroindustria, Escuela Politécnica Nacional, Quito 170517, Ecuador.
- Department of Automotive and Transport Engineering, Transilvania University of Brasov (UniTBv), 1 Politehnicii Street, 500024 Brasov, Romania.
ORCID-Profile: Franciszek Pawlak, Cristina Pavon, Harrison de la Rosa-Ramírez, Miguel Aldas, Dana Luca Motoc
Förderung
- Ministerio de Ciencia, Innovación y Universidades
- European Union “NextGenerationEU”/PRTR
- Escuela Politécnica Nacional
Zitieren
APA
Pawlak, F., Pavon, C., de la Rosa-Ramírez, H., Aldas, M., & Luca Motoc, D. (2026). From Melt Processing to Composting: Solvent-Free Thermoplastic Starch/Polyvinyl Alcohol Blends with Tailored Structure and Performance. Polymers, 18(11), 1333. https://doi.org/10.3390/polym18111333
Vancouver
Pawlak F, Pavon C, de la Rosa-Ramírez H, Aldas M, Luca Motoc D. From Melt Processing to Composting: Solvent-Free Thermoplastic Starch/Polyvinyl Alcohol Blends with Tailored Structure and Performance. Polymers. 2026;18(11):1333. doi:10.3390/polym18111333
BibTeX
@article{Pawlak2026,
author = {Pawlak, Franciszek and Pavon, Cristina and de la Rosa-Ramírez, Harrison and Aldas, Miguel and Luca Motoc, Dana},
title = {From Melt Processing to Composting: Solvent-Free Thermoplastic Starch/Polyvinyl Alcohol Blends with Tailored Structure and Performance},
journal = {Polymers},
year = {2026},
volume = {18},
number = {11},
pages = {1333},
doi = {10.3390/polym18111333}
}
EUVIMED