EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers

Bing Song, Yang Cao, Liang Wang, Yake Shen, Xiaoming Qian

Polymers · 27.04.2023 · 15 (9) · 2071

DOI: 10.3390/polym15092071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.04.2023. Verfasst von Bing Song und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Textiles Science and Engineering, Tiangong University, Tianjin 300387, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Plan Project, Tianjin Science and Technology Plan Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-fine fibers derived from sea-island fibers have attracted great attention due to their excellent overall performance. However, green and efficient splitting of sea-island fibers is still a challenging task. In this work, thermoplastic polyvinyl alcohol (TPVA) was prepared by the physical blending of plasticizer. The modified TPVA showed a high decomposition temperature (285 °C) and a wide thermoplastic processing window. This made TPVA match well with polyamide 6 (PA6) to form conjugated melts at 250 °C. Corresponding PVA/PA6 sea-island fibers were first reported to realize water-splitting instead of alkali-extraction of “sea” polymers. The effects of sea/island mass ratios and different spinning speeds on the properties of PVA/PA6 sea-island pre-oriented yarn (POY) were investigated. A higher spinning speed enhanced the orientation-induced crystalline behavior of fiber, therefore increasing the tensile strength of fibers. As the increase of spinning speed from 1000 to 1500 m/min, the crystalline degree of corresponding POYs increased from 9.9 to 14.3%. The plasticizer in PVA did not diffuse to the PA matrix during spinning. However, PVA could induce the crystallization of PA6 via interfacial hydrogen bonding. When the spinning speed was 1500 m/min, and PVA/PA6 was 7:3, the tensile strength reached the highest value of 1.67 cN/dtex. The uniform diameters of ultra-fine PA6 fibers (2–5 μm) were obtained by an environment-friendly water-splitting process. The “sea” phase (TPVA) in sea-island fiber could be removed quickly by boiling water treatment in 3 min. This green and energy-saving sea-island fiber splitting technique is of great significance in reducing CO2 emissions during the preparation of super-fine fibers.

Schlagwörter

Stichwörter der Autor:innen

conjugated melt spinningsea-island fiberthermoplastic polyvinyl alcoholultra-fine fiberwater-splitting

Autor:innen und Institutionen

  • School of Textiles Science and Engineering, Tiangong University, Tianjin 300387, China.
  • Mingxin Xuteng (Jiangsu) Innovation Research Institute Limited Company, Xinyi 221433, China.

Förderung

  • National Key Research and Development Plan Project
  • Tianjin Science and Technology Plan Project

Zitieren

APA

Song, B., Cao, Y., Wang, L., Shen, Y., & Qian, X. (2023). Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers. Polymers, 15(9), 2071. https://doi.org/10.3390/polym15092071

Vancouver

Song B, Cao Y, Wang L, Shen Y, Qian X. Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers. Polymers. 2023;15(9):2071. doi:10.3390/polym15092071

BibTeX
@article{Song2023,
  author = {Song, Bing and Cao, Yang and Wang, Liang and Shen, Yake and Qian, Xiaoming},
  title = {Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2071},
  doi = {10.3390/polym15092071}
}
Kostenlos starten →