EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical, Thermal and X-Ray Shielding Properties of Lead-Free Composites of HDPE Filled with Metal-Based Powders

Sitah Alanazi iD, Shahad Alshadokhi, Eid Alosime iD, Mansour Almurayshid iD, Mohammed Alsuhybani, Mohammad Marashdeh iD

Polymers · 06.04.2026 · 18 (7) · 893

DOI: 10.3390/polym18070893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.04.2026. Verfasst von Sitah Alanazi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, College of Sciences, Imam Mohammad Ibn Saud Islamic University (IMSIU), P.O. Box 90950, Riyadh 11623, Saudi Arabia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Imam Mohammad ibn Saud Islamic University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing utilization of radiation in medicine, industry, and water purification highlights the need for efficient radiation-protection materials. This study investigates lead-free polymer composites based on high-density polyethylene (HDPE) filled with four metallic fillers: tungsten carbide (WC), molybdenum carbide (MoC), tungsten (W), and molybdenum (Mo) at 15 wt%. The objective is to evaluate their potential as alternatives to lead for shielding ionizing radiation. Mechanical performance was examined through tensile testing, while thermal stability was assessed based on the residual mass. Radiation-attenuation behavior was analyzed through linear and mass attenuation coefficients (µ and µₘ), radiation protection efficiency (RPE), half-value layer (HVL), mean free path (MFP), buildup factors (B), and effective atomic number (Zeff) within the 47.9–248 keV energy range. The HDPE/W composite exhibited the greatest enhancement, with a mass attenuation coefficient (µₘ) 82.5% higher than that of pure HDPE, along with the highest linear attenuation coefficient (µ). Furthermore, tungsten-loaded samples achieved an RPE of 98.05% at 47.9 keV. The increased density, low B, and high Zeff values collectively contribute to superior shielding performance. These findings indicate that HDPE filled with WC, MoC, W, and Mo are promising lead-free candidates for low-energy X-ray shielding applications.

Schlagwörter

Stichwörter der Autor:innen

X-ray shieldinglead-free materialmetal-based fillerspolymersradiation attenuation

Autor:innen und Institutionen

  • Department of Physics, College of Sciences, Imam Mohammad Ibn Saud Islamic University (IMSIU), P.O. Box 90950, Riyadh 11623, Saudi Arabia.
  • King Abdulaziz City for Science and Technology (KACST), P.O. Box 6086, Riyadh 11442, Saudi Arabia.

ORCID-Profile: Sitah Alanazi, Eid Alosime, Mansour Almurayshid, Mohammad Marashdeh

Förderung

  • Imam Mohammad ibn Saud Islamic University

Zitieren

APA

Alanazi, S., Alshadokhi, S., Alosime, E., Almurayshid, M., Alsuhybani, M., & Marashdeh, M. (2026). Mechanical, Thermal and X-Ray Shielding Properties of Lead-Free Composites of HDPE Filled with Metal-Based Powders. Polymers, 18(7), 893. https://doi.org/10.3390/polym18070893

Vancouver

Alanazi S, Alshadokhi S, Alosime E, Almurayshid M, Alsuhybani M, Marashdeh M. Mechanical, Thermal and X-Ray Shielding Properties of Lead-Free Composites of HDPE Filled with Metal-Based Powders. Polymers. 2026;18(7):893. doi:10.3390/polym18070893

BibTeX
@article{Alanazi2026,
  author = {Alanazi, Sitah and Alshadokhi, Shahad and Alosime, Eid and Almurayshid, Mansour and Alsuhybani, Mohammed and Marashdeh, Mohammad},
  title = {Mechanical, Thermal and X-Ray Shielding Properties of Lead-Free Composites of HDPE Filled with Metal-Based Powders},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {893},
  doi = {10.3390/polym18070893}
}
Kostenlos starten →