Synchrotron X-ray tomography and functional evaluations of lead-free piezoceramic-filled natural rubber composites
Journal of Metals, Materials and Minerals · 18.11.2026 · 37 (1) · e2650
DOI: 10.55713/jmmm.v37i1.2650 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metals, Materials and Minerals, online erschienen am 18.11.2026. Verfasst von Chotiros DOKKHAN und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Flexible piezoelectric composite materials have gained increasing attention due to their widespread applications in modern electronic devices such as energy harvesters, dielectric capacitors, or wearable sensors. In this work, flexible piezoelectric composites were developed by incorporating BCZT lead-free piezoceramic fillers into a flexible NR matrix (NR/BCZT composites) with BCZT content ranging from 0 phr to 60 phr (referred as 0BCZT to 60BCZT). Additionally, the structure-property relationships of the NR/BCZT composites were evaluated using synchrotron X-ray tomographic microscopy (SR-XTM), in conjunction with various materials characterization techniques. This work found that the addition of BCZT filler into NR reduced cure time from 14.01 min (0BCZT) to 11.18 min (60BCZT), whereas hardness of the NR/BCZT composites increased from 40.18±0.08 to 45.92±0.11 with increasing BCZT content from 0 phr to 60 phr, respectively. Conversely, the tensile strength of the NR/BCZT composites at all compositions was lower than that of pure NR (tensile strength of 0BCZT = 24.70±2.56 MPa), except for the 30BCZT composite, which exhibited strong adhesion between the BCZT filler and the NR matrix and resulted in the observed highest tensile strength of 26.88±0.90 MPa. Interestingly, no increase in dielectric permittivity occurred at a low BCZT loading of 15 phr, while a significant enhancement from 2.76±0.13 to 3.34±0.08 was observed when the BCZT content was further increased from 15 phr to 30 phr, respectively. The filler dispersion in the NR matrix was investigated using synchrotron X-ray tomographic microscopy (SR-XTM), combined with quantitative analysis of SEM images. The results showed that, the interparticle spacing decreased with increasing the BCZT content in the NR/BCZT composites. This reduction in the interparticle spacing play an important role in the observed electrical properties of the NR/BCZT composites. These findings help to provide a better understanding of the development of lead-free piezoceramic-filled natural rubber composites.
Zitieren
APA
DOKKHAN, C., PATTANAWANIDCHAI, S., SAEHENG, C., PAKAWANIT, P., WICHITTANAKOM, C., & TANGSRITRAKUL, J. (2026). Synchrotron X-ray tomography and functional evaluations of lead-free piezoceramic-filled natural rubber composites. Journal of Metals, Materials and Minerals, 37(1), e2650. https://doi.org/10.55713/jmmm.v37i1.2650
Vancouver
DOKKHAN C, PATTANAWANIDCHAI S, SAEHENG C, PAKAWANIT P, WICHITTANAKOM C, TANGSRITRAKUL J. Synchrotron X-ray tomography and functional evaluations of lead-free piezoceramic-filled natural rubber composites. Journal of Metals, Materials and Minerals. 2026;37(1):e2650. doi:10.55713/jmmm.v37i1.2650
BibTeX
@article{DOKKHAN2026,
author = {DOKKHAN, Chotiros and PATTANAWANIDCHAI, Sirichai and SAEHENG, Chutima and PAKAWANIT, Phakkhananan and WICHITTANAKOM, Chumpon and TANGSRITRAKUL, Jirapa},
title = {Synchrotron X-ray tomography and functional evaluations of lead-free piezoceramic-filled natural rubber composites},
journal = {Journal of Metals, Materials and Minerals},
year = {2026},
volume = {37},
number = {1},
pages = {e2650},
doi = {10.55713/jmmm.v37i1.2650}
}
EUVIMED