EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Six-Axis Robotic Milling for Enhancing Surface Quality and Dimensional Accuracy of Fused Granular Fabrication Parts

Rui Zhang, Xiping Li, Youqiang Yao, Sisi Wang, Yu Zhou, Zhonglue Hu

Polymers · 28.02.2026 · 18 (5) · 608

DOI: 10.3390/polym18050608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2026. Verfasst von Rui Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Engineering, Zhejiang Normal University, Jinhua 321004, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program Project of Jinhua.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused granular fabrication (FGF) offers high deposition efficiency and low material cost for large-scale mold production, but commonly yields parts with surface defects and dimensional deviations. This study develops a six-axis robotic post-processing workstation that integrates multi-DOF toolpath planning and real-time communication to flexibly machine FGF components with complex geometries. Using short-fiber-reinforced polypropylene (PP-GF), robotic milling experiments were performed, and spindle speed, feed rate, and cutting depth were systematically optimized to enhance surface quality and dimensional accuracy. The NSGA-III algorithm optimizes parameters, thereby increasing machining efficiency by 4.9% and reducing surface roughness by 12.35%. Results show that the proposed platform effectively improves the machining performance of FGF-printed parts, demonstrating its feasibility for high-precision post-processing. The work provides a practical technical route for the hybrid additive–subtractive manufacturing of large 3D-printed structures.

Schlagwörter

Stichwörter der Autor:innen

PP-GF compositesfused granular fabricationmilling parametersmulti-objective optimizationrobotic arm millingsurface quality

Autor:innen und Institutionen

  • College of Engineering, Zhejiang Normal University, Jinhua 321004, China.

Förderung

  • Science and Technology Program Project of Jinhua

Zitieren

APA

Zhang, R., Li, X., Yao, Y., Wang, S., Zhou, Y., & Hu, Z. (2026). Six-Axis Robotic Milling for Enhancing Surface Quality and Dimensional Accuracy of Fused Granular Fabrication Parts. Polymers, 18(5), 608. https://doi.org/10.3390/polym18050608

Vancouver

Zhang R, Li X, Yao Y, Wang S, Zhou Y, Hu Z. Six-Axis Robotic Milling for Enhancing Surface Quality and Dimensional Accuracy of Fused Granular Fabrication Parts. Polymers. 2026;18(5):608. doi:10.3390/polym18050608

BibTeX
@article{Zhang2026,
  author = {Zhang, Rui and Li, Xiping and Yao, Youqiang and Wang, Sisi and Zhou, Yu and Hu, Zhonglue},
  title = {Six-Axis Robotic Milling for Enhancing Surface Quality and Dimensional Accuracy of Fused Granular Fabrication Parts},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {5},
  pages = {608},
  doi = {10.3390/polym18050608}
}
Kostenlos starten →