EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Five-Axis Micro Ball-End Milling Force Prediction for Micro Curved-Surface Parts

Zhenghu Yan iD, Yicheng Yang, Shuai Wang, Chenxi Yang, Ruisi Qin

Micromachines · 15.08.2026 · 17 (8) · 961

DOI: 10.3390/mi17080961 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.08.2026. Verfasst von Zhenghu Yan und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710021, China. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Xi'an City Science and Technology Plan Project, Natural Science Basic Research Program of Shaanxi.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro curved-surface parts are widely used in the aerospace, defense, biomedical, and automotive industries, and their growing adoption imposes increasingly stringent performance requirements. Five-axis micro-milling can achieve precision machining of parts with complex shapes. In the micro-milling process, the cutting force is a critical parameter, as it is the main factor causing machining deformation, vibration, and tool wear. Therefore, this study develops a prediction model for five-axis micro-milling forces in the machining of micro complex curved-surface parts. First, four coordinate systems were established for the five-axis milling process, and the transformation relationships among them were derived. A cutter–workpiece engagement (CWE) extraction method based on solid modeling was also introduced. Then, an instantaneous undeformed chip thickness (IUCT) model was established, taking into account tool runout, elastic recovery of the machined surface, minimum chip thickness, and the local radius of the micro ball-end mill. On this basis, a five-axis micro-milling force prediction model was developed. Finally, five-axis micro-milling experiments were conducted on a micro-impeller and a micro-spherical part, and the cutting forces at different cutter location (CL) points were measured. For the micro-impeller blade, the average percentage errors in the X, Y, and Z directions at all selected CL points were below 11.2%; for the micro-spherical part, the corresponding errors were below 14.4%. These results show good agreement between the predicted and measured values, verifying the effectiveness of the proposed model.

Schlagwörter

Stichwörter der Autor:innen

ball end micro millingcutter–workpiece engagementcutting forcefive-axisinstantaneous undeformed chip thickness

Autor:innen und Institutionen

  • School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710021, China.
  • Xi'an Jingdiao Software Technology Co., Ltd., Xi'an 710119, China.

ORCID-Profile: Zhenghu Yan

Förderung

  • National Natural Science Foundation of China
  • Xi'an City Science and Technology Plan Project
  • Natural Science Basic Research Program of Shaanxi
  • State Administration of Foreign Experts Affairs
  • Key Research and Development Projects of Shaanxi Province
  • Xi’an City Science and Technology Plan Project
  • National Foreign Expert Projects

Zitieren

APA

Yan, Z., Yang, Y., Wang, S., Yang, C., & Qin, R. (2026). Five-Axis Micro Ball-End Milling Force Prediction for Micro Curved-Surface Parts. Micromachines, 17(8), 961. https://doi.org/10.3390/mi17080961

Vancouver

Yan Z, Yang Y, Wang S, Yang C, Qin R. Five-Axis Micro Ball-End Milling Force Prediction for Micro Curved-Surface Parts. Micromachines. 2026;17(8):961. doi:10.3390/mi17080961

BibTeX
@article{Yan2026,
  author = {Yan, Zhenghu and Yang, Yicheng and Wang, Shuai and Yang, Chenxi and Qin, Ruisi},
  title = {Five-Axis Micro Ball-End Milling Force Prediction for Micro Curved-Surface Parts},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {961},
  doi = {10.3390/mi17080961}
}
Kostenlos starten →