EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pose- and Direction-Dependent Modulation and Accuracy in Robotic Milling

Chandan, Daksh Singh Chauhan, Nalli Gnaneswara Rao, Ranjeet Kumar, Sajan Kapil, Mohit Law

Journal of Manufacturing and Materials Processing · 19.04.2026 · 10 (4) · 137

DOI: 10.3390/jmmp10040137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 19.04.2026. Verfasst von Chandan und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indo-German Science & Technology Centre.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Robotic milling offers flexibility and lower capital cost than conventional CNC machining but is limited by low, pose-dependent structural stiffness. This study experimentally investigates how pose, cutting orientation, and engagement conditions govern dynamic response and machining accuracy, benchmarked against a CNC machine under matched conditions. Tool-point frequency response functions show that the robot exhibits dominant low-frequency structural modes at 8–15 Hz with compliances on the order of 10−5 m/N, one to two orders of magnitude more flexible than higher-frequency tool–holder modes (~10−6 m/N). In contrast, the CNC system is dominated by a stiff mode near 600 Hz (~2 × 10−7 m/N) with negligible low-frequency compliance. During cutting, the response is not resonance-driven; instead, low-frequency compliance induces modulation of spindle-synchronous vibrations, resulting in broadband spectral spreading and cycle-to-cycle variability. Poincaré analysis captures this modulation, which increases with spindle speed and depth of cut. Orientation-dependent alignment with compliant directions amplifies vibration and cross-axis coupling. Regression analysis shows a significant association between Z-direction vibration and depth-of-cut deviation (R = 0.739 locally; R = 0.363 globally). The results establish a framework linking compliance, modulation, and machining performance in robotic milling.

Förderung

  • Indo-German Science & Technology Centre

Zitieren

APA

Chandan, Chauhan, D. S., Rao, N. G., Kumar, R., Kapil, S., & Law, M. (2026). Pose- and Direction-Dependent Modulation and Accuracy in Robotic Milling. Journal of Manufacturing and Materials Processing, 10(4), 137. https://doi.org/10.3390/jmmp10040137

Vancouver

Chandan, Chauhan DS, Rao NG, Kumar R, Kapil S, Law M. Pose- and Direction-Dependent Modulation and Accuracy in Robotic Milling. Journal of Manufacturing and Materials Processing. 2026;10(4):137. doi:10.3390/jmmp10040137

BibTeX
@article{Chandan2026,
  author = {Chandan and Chauhan, Daksh Singh and Rao, Nalli Gnaneswara and Kumar, Ranjeet and Kapil, Sajan and Law, Mohit},
  title = {Pose- and Direction-Dependent Modulation and Accuracy in Robotic Milling},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {4},
  pages = {137},
  doi = {10.3390/jmmp10040137}
}
Kostenlos starten →