Hexaallylaminocyclotriphosphazene-Modified Dental Compositions for 3D Printing of Dental Crowns
Polymers · 24.12.2025 · 18 (1) · 53
DOI: 10.3390/polym18010053 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.12.2025. Verfasst von Bakary Tamboura und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Technology of Plastics, Mendeleev University of Chemical Technology of Russia, Miusskaya sq., 9, Moscow 125047, Russia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The development of dental restorative materials with improved physical and mechanical properties is an important area of research. In this study, hexaallylaminocyclotriphosphazene (HAP) was used to modify dental composites. HAP is a compound with multiple carbon-carbon bonds that can react with methacrylic resins to form a copolymer. HAP was synthesized by reacting allylamine with hexachlorocyclotriphosphazene and characterized it using 1H and 31P NMR spectroscopy and MALDI-TOF mass spectrometry. Molecular dynamics simulations using the MM2 force field showed that HAP has a nanosize (the diameter of a sphere eclosing the molecule is 1.3 nm), making it a suitable nanomodifier for dental composites. Using 3D printing, samples of dental methacrylic composites containing up to 10 wt. % HAP were prepared and their physicomechanical properties and antibacterial activity against gram-positive bacteria S. mutans were studied. As a result, it was established that the maximum flexural strength (115.1 ± 10.2 MPa) is achieved with a modifier content of 5 wt.% in the composite. The maximum value of inhibition of S. mutans growth in a liquid nutrient medium is achieved with a HAP content of 10 wt.% in the sample. Furthermore, with a HAP content of more than 5 wt.% in the composite, inhibition of biofilm on the material surface is observed. The resulting composite is proposed for use as dental crowns in restorative dentistry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Technology of Plastics, Mendeleev University of Chemical Technology of Russia, Miusskaya sq., 9, Moscow 125047, Russia.
- Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, Vavilova St., 28, Bld. 1, Moscow 119991, Russia.
- Belgorod National Research, Pobedy Street, 85, Belgorod 308015, Russia.
ORCID-Profile: Bakary Tamboura, Pavel Yudaev, Vladimir Chuev, Evgeniy Chistyakov
Zitieren
APA
Tamboura, B., Yudaev, P., Butorova, I., Klyukin, B., Chuev, V., & Chistyakov, E. (2025). Hexaallylaminocyclotriphosphazene-Modified Dental Compositions for 3D Printing of Dental Crowns. Polymers, 18(1), 53. https://doi.org/10.3390/polym18010053
Vancouver
Tamboura B, Yudaev P, Butorova I, Klyukin B, Chuev V, Chistyakov E. Hexaallylaminocyclotriphosphazene-Modified Dental Compositions for 3D Printing of Dental Crowns. Polymers. 2025;18(1):53. doi:10.3390/polym18010053
BibTeX
@article{Tamboura2025,
author = {Tamboura, Bakary and Yudaev, Pavel and Butorova, Irina and Klyukin, Bogdan and Chuev, Vladimir and Chistyakov, Evgeniy},
title = {Hexaallylaminocyclotriphosphazene-Modified Dental Compositions for 3D Printing of Dental Crowns},
journal = {Polymers},
year = {2025},
volume = {18},
number = {1},
pages = {53},
doi = {10.3390/polym18010053}
}
EUVIMED