EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Crosslinked Poly(L-lactic acid) with Enhanced Shape Memory Performance via γ-Ray Irradiation

Jiayao Wang iD, Jingxin Zhao, Dong Yang, Jichun You iD, Guipeng Yu

Polymers · 17.11.2025 · 17 (22) · 3041

DOI: 10.3390/polym17223041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.11.2025. Verfasst von Jiayao Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "Pioneer" and "Leading Goose" R&D Program of Zhejiang, National Natural Science Foundation of China, Interdisciplinary Research Project of Hangzhou Normal University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, an innovative approach has been established to overcome the intrinsic limitations of poly(L-lactic acid) (PLLA)-based shape memory polymers (SMPs) by introducing γ-ray-induced crosslinking in miscible PLLA/triallyl isocyanurate (TAIC) blends. The crosslinking density can be precisely adjusted by the TAlC content and absorbed irradiation dose, enabling the fabrication of PLLA SMPS with outstanding shape memory properties. In crosslinked PLLA SMPs, the crosslinking point can significantly suppress the cold crystallization and prevent the irreversible chain slippage during deformation in the shape memory process, resulting in not only a high shape recovery ratio (99.5% at 10 wt% TAIC) but also a good cycle stability (maintaining 97.9% after three cycles). Moreover, the crosslinking points as well as the PLLA crystals endow PLLA with triple-shape memory performance, in which both the glass transition temperature and melting temperature serve as switch conditions. Remarkably, even under extreme deformation conditions (strain up to 800%), the crosslinked PLLA SMPs maintain a recovery ratio as high as 99.3%. Our results offer a novel strategy for fabricating high-performance PLLA SMPs with exceptional shape recovery capabilities.

Schlagwörter

Stichwörter der Autor:innen

PLLAcrosslinkingshape memoryγ-ray irradiation

Autor:innen und Institutionen

  • College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China.
  • College of Material, Chemistry and Chemical Engineering, Key Laboratory of Organosilicon Chemistry and Material Technology, Ministry of Education, Zhejiang Key Laboratory of Organosilicon Material Technology, Hangzhou N…
  • Department of Cardiovascular Medicine, Affiliated Hospital of Hangzhou Normal University, Hangzhou 310015, China.

ORCID-Profile: Jiayao Wang, Jichun You

Förderung

  • "Pioneer" and "Leading Goose" R&D Program of Zhejiang
  • National Natural Science Foundation of China
  • Interdisciplinary Research Project of Hangzhou Normal University
  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang

Zitieren

APA

Wang, J., Zhao, J., Yang, D., You, J., & Yu, G. (2025). Fabrication of Crosslinked Poly(L-lactic acid) with Enhanced Shape Memory Performance via γ-Ray Irradiation. Polymers, 17(22), 3041. https://doi.org/10.3390/polym17223041

Vancouver

Wang J, Zhao J, Yang D, You J, Yu G. Fabrication of Crosslinked Poly(L-lactic acid) with Enhanced Shape Memory Performance via γ-Ray Irradiation. Polymers. 2025;17(22):3041. doi:10.3390/polym17223041

BibTeX
@article{Wang2025,
  author = {Wang, Jiayao and Zhao, Jingxin and Yang, Dong and You, Jichun and Yu, Guipeng},
  title = {Fabrication of Crosslinked Poly(L-lactic acid) with Enhanced Shape Memory Performance via γ-Ray Irradiation},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {22},
  pages = {3041},
  doi = {10.3390/polym17223041}
}
Kostenlos starten →