EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Poly-L-Lactic Acid Honeycomb Scaffold for Enhanced Cytocompatibility

Petr Slepička iD, Iva Labíková iD, Bára Frýdlová iD, Matěj Budina iD, Petr Sajdl, Václav Švorčík, Nikola Slepičková Kasálková

Polymers · 09.11.2026 · 18 (21) · 2800

DOI: 10.3390/polym18212800 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.11.2026. Verfasst von Petr Slepička und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Solid State Engineering, University of Chemistry and Technology Prague, 166 28 Prague, Czech Republic. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Ministry of Health of the Czech Republic, Specific university research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we present the development of biopolymer honeycomb (HCP PLLA) microstructures on plasma-modified PTFE polymer using the improved phase separation method with the aim of preparing a surface with enhanced cytocompatibility. To determine changes in surface morphology and characterize the size and shape of the prepared PLLA microstructures, laser confocal microscopy (LCM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) methods were used. To determine the chemical composition of the surface of substrates modified with the formed HCP PLLA microstructures, X-ray photoelectron spectroscopy (XPS) was used. PTFE samples modified with an 8 W plasma discharge proved to be a suitable material for further study as a substrate for honeycomb patterns and biocompatibility testing. It was found that the formation (size) of PLLA microstructures is influenced not only by the exposure time of the samples in plasma but also by the PLLA content in the coating solution and the thermal stress of the material. Plasma modification and subsequent phase separation significantly increased the surface amount of oxygen and carbon and suppress the surface amount of fluorine to a minimum, which is evidence of almost 100% coverage of the PTFE surface with the PLLA coating solution. Biocompatibility testing on selected PTFE samples revealed that modification with 8 W plasma in combination with HCP microstructures—created by the phase separation method in solution with 3 wt. % PLLA—leads to significant support for SaOS-2 osteoblast cell proliferation. This study highlights the potential of biopolymer honeycomb pattern surfaces with engineered topography for advanced biomedical applications.

Schlagwörter

Stichwörter der Autor:innen

biopolymercytocompatibilityhoneycomb patternplasma treatmentpoly-L-lactic acidsurface morphology

Autor:innen und Institutionen

  • Department of Solid State Engineering, University of Chemistry and Technology Prague, 166 28 Prague, Czech Republic.
  • Department of Power Engineering, University of Chemistry and Technology Prague, 166 28 Prague, Czech Republic.

ORCID-Profile: Petr Slepička, Iva Labíková, Bára Frýdlová, Matěj Budina

Förderung

  • European Union
  • Ministry of Health of the Czech Republic
  • Specific university research

Zitieren

APA

Slepička, P., Labíková, I., Frýdlová, B., Budina, M., Sajdl, P., Švorčík, V., & Slepičková Kasálková, N. (2026). A Poly-L-Lactic Acid Honeycomb Scaffold for Enhanced Cytocompatibility. Polymers, 18(21), 2800. https://doi.org/10.3390/polym18212800

Vancouver

Slepička P, Labíková I, Frýdlová B, Budina M, Sajdl P, Švorčík V, et al. A Poly-L-Lactic Acid Honeycomb Scaffold for Enhanced Cytocompatibility. Polymers. 2026;18(21):2800. doi:10.3390/polym18212800

BibTeX
@article{Slepika2026,
  author = {Slepička, Petr and Labíková, Iva and Frýdlová, Bára and Budina, Matěj and Sajdl, Petr and Švorčík, Václav and Slepičková Kasálková, Nikola},
  title = {A Poly-L-Lactic Acid Honeycomb Scaffold for Enhanced Cytocompatibility},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2800},
  doi = {10.3390/polym18212800}
}
Kostenlos starten →