EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PP-Based Blends with PVP-I Additive: Mechanical, Thermal, and Barrier Properties for Packaging of Iodophor Pharmaceutical Formulations

Melania Leanza iD, Domenico Carmelo Carbone, Giovanna Poggi iD, Marco Rapisarda iD, Marilena Baiamonte, Emanuela Teresa Agata Spina iD, David Chelazzi iD, Piero Baglioni iD, Francesco Paolo La Mantia iD, Paola Rizzarelli iD

Polymers · 09.09.2025 · 17 (18) · 2442

DOI: 10.3390/polym17182442 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.09.2025. Verfasst von Melania Leanza und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymers, Composites and Biomaterials-National Research Council (IPCB-CNR), 95126 Catania, Italy. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: PO FESR Sicily 2014-2020, PO FESR Sicily 2014–2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of minor components on leaching molecular iodine (I2) through polypropylene (PP)-based packaging from a povidone iodine-based (PVP-I) formulation, simulating an ophthalmic application, was evaluated. I2 is a cheap, broad-spectrum, and multi-target antiseptic. Nevertheless, it is volatile, and the prolonged storage of I2-based formulations is demanding in plastic packaging because of transmission through the material. Therefore, we explored the possibility of moderating the loss of I2 from an iodophor formulation by introducing small amounts of molecular iodine into the polymer material commonly used in eyedropper caps, i.e., PP. Thus, PP was blended via an extrusion process with a polymeric complex containing iodine (such as PVP-I) or with a second polymeric component able to complex the I2 released from an iodophor solution. The aim of this work was to introduce I2 into PP-based polymer matrices without using organic solvents and indirectly, i.e., through the addition of components that could generate molecular iodine or complex it in the solid phase, as I2 is heat-sensitive. To increase the miscibility between PP and PVP-I, poly(N-vinylpyrrolidone) (PVP) or a vinyl pyrrolidone vinyl acetate copolymer 55/45 (Sokalan) were added as compatibilizers. The PP-based binary and ternary blends, in granular or sheet form, were characterized thermally (Differential Scanning Calorimetry, DSC, and Thermogravimetric analysis, TGA), mechanically (tensile tests), morphologically (scanning electron microscopy (SEM)), and chemically (attenuated total reflectance Fourier transform infrared (ATR-FTIR)). Additionally, the variation in wettability induced by the introduction of the hydrophilic minority components was determined by static contact angle measurements (static contact angle (SCA)), and tests were carried out to determine the barrier properties against oxygen (oxygen transmission rate (OTR)) and molecular iodine. The I2 leaching of the different blends was compared with that of PP by monitoring the I2 retention in a buffered PVP-I solution via UV-vis spectroscopy. Overall, the experimental data showed the capability of the minority components in the blends to increase thermal stability as well as act as a barrier to oxygen. Additionally, the PP blend with PVP-I induced a reduction in molecular iodine leaching in comparison with PP.

Schlagwörter

Stichwörter der Autor:innen

blendsiodophorplastic packagingpolypropylenepovidone-iodine

Autor:innen und Institutionen

  • Institute of Polymers, Composites and Biomaterials-National Research Council (IPCB-CNR), 95126 Catania, Italy.
  • Department of Chemistry "Ugo Schiff" and CSGI, University of Florence, Sesto Fiorentino, 50019 Florence, Italy.
  • Department of Engineering, University of Palermo, 90128 Palermo, Italy.
  • National Interuniversity Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy.

ORCID-Profile: Melania Leanza, Giovanna Poggi, Marco Rapisarda, Emanuela Teresa Agata Spina, David Chelazzi, Piero Baglioni, Francesco Paolo La Mantia, Paola Rizzarelli

Förderung

  • PO FESR Sicily 2014-2020
  • PO FESR Sicily 2014–2020

Zitieren

APA

Leanza, M., Carbone, D. C., Poggi, G., Rapisarda, M., Baiamonte, M., Spina, E. T. A., Chelazzi, D., Baglioni, P., La Mantia, F. P., & Rizzarelli, P. (2025). PP-Based Blends with PVP-I Additive: Mechanical, Thermal, and Barrier Properties for Packaging of Iodophor Pharmaceutical Formulations. Polymers, 17(18), 2442. https://doi.org/10.3390/polym17182442

Vancouver

Leanza M, Carbone DC, Poggi G, Rapisarda M, Baiamonte M, Spina ETA, et al. PP-Based Blends with PVP-I Additive: Mechanical, Thermal, and Barrier Properties for Packaging of Iodophor Pharmaceutical Formulations. Polymers. 2025;17(18):2442. doi:10.3390/polym17182442

BibTeX
@article{Leanza2025,
  author = {Leanza, Melania and Carbone, Domenico Carmelo and Poggi, Giovanna and Rapisarda, Marco and Baiamonte, Marilena and Spina, Emanuela Teresa Agata and Chelazzi, David and Baglioni, Piero and La Mantia, Francesco Paolo and Rizzarelli, Paola},
  title = {PP-Based Blends with PVP-I Additive: Mechanical, Thermal, and Barrier Properties for Packaging of Iodophor Pharmaceutical Formulations},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {2442},
  doi = {10.3390/polym17182442}
}
Kostenlos starten →