EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review of Biopolymer Polyhydroxybutyrate (PHB) and Blends: Modification of Thermal and Mechanical Properties via Additive Manufacturing Processing

Dan Li, Yunxia Yang, Ruochen Liu, Yufeng Wu, Fu Guo iD

Polymers · 20.11.2025 · 17 (22) · 3083

DOI: 10.3390/polym17223083 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 20.11.2025. Verfasst von Dan Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 128 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DanLi, the National Key Research and Development Program of China, the General Program of Science and Technology Development Project, Beijing Municipal Education Commission, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The non-degradable polymers used in daily and commercial application are generally inexpensive; however, their excessive use leads to extensive environmental damage. In light of this, the demand for bio-derived, biocompatible, and biodegradable polymers increases since these materials are potential alternatives to petroleum-derived polymers. Polyhydroxybutyrate (PHB), a class of highly crystalline thermoplastics derived from natural sources, offer significant environmental advantages over fossil fuel-based polymers due to their inherent biodegradability. This eco-friendly profile has spurred research into their commercial applications, ranging from food packaging to pharmaceuticals. However, processing challenges, particularly for polyhydroxybutyrate (PHB)—including high costs and the requirement for elevated temperatures—remain major obstacles. Additionally, PHB-based products are often brittle and exhibit inferior mechanical properties compared to conventional petroleum-based polymers such as polypropylene and polyethylene. This review comprehensively examines the state-of-the-art processing techniques for PHB and their composites. Key properties, such as mechanical performance, thermal behavior, and degradation characteristics, are scrutinized. Furthermore, the review explores mitigation strategies, such as blending and plasticization, aimed at overcoming the mechanical brittleness while upholding the principles of sustainability and maintaining a low carbon footprint.

Schlagwörter

Stichwörter der Autor:innen

material processingpoly-3-hydroxybutyrate P(3HB)poly-4-hydroxybutyrate P(4HB)polyhydroxybutyratepolymer blends

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China.
  • Key Laboratory of Advanced Functional Materials, Education Ministry of China, Beijing University of Technology, Beijing 100124, China.
  • School of Mechanical Engineering and Automation, Beihang University, Beijing 102206, China.
  • Institute Circular Economy, Beijing University of Technology, Beijing 100124, China.
  • School of of Mechanical Electrical Engineering, Beijing Information Science and Technology University, Beijing 100192, China.

ORCID-Profile: Fu Guo

Förderung

  • DanLi
  • the National Key Research and Development Program of China
  • the General Program of Science and Technology Development Project, Beijing Municipal Education Commission, China

Zitieren

APA

Li, D., Yang, Y., Liu, R., Wu, Y., & Guo, F. (2025). Review of Biopolymer Polyhydroxybutyrate (PHB) and Blends: Modification of Thermal and Mechanical Properties via Additive Manufacturing Processing. Polymers, 17(22), 3083. https://doi.org/10.3390/polym17223083

Vancouver

Li D, Yang Y, Liu R, Wu Y, Guo F. Review of Biopolymer Polyhydroxybutyrate (PHB) and Blends: Modification of Thermal and Mechanical Properties via Additive Manufacturing Processing. Polymers. 2025;17(22):3083. doi:10.3390/polym17223083

BibTeX
@article{Li2025,
  author = {Li, Dan and Yang, Yunxia and Liu, Ruochen and Wu, Yufeng and Guo, Fu},
  title = {Review of Biopolymer Polyhydroxybutyrate (PHB) and Blends: Modification of Thermal and Mechanical Properties via Additive Manufacturing Processing},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {22},
  pages = {3083},
  doi = {10.3390/polym17223083}
}
Kostenlos starten →