Thermal, Mechanical, and Barrier Properties of PHBV Nanocomposites via TiO2 Incorporation for Sustainable Food Packaging
Polymers · 19.12.2025 · 18 (1) · 11
DOI: 10.3390/polym18010011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.12.2025. Verfasst von Karlo Grgurević und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, 10000 Zagreb, Croatia. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Recovery and Resilience Plan.
Abstract (Originalsprache)
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable polyester considered for food packaging, though its mechanical and barrier limitations pose challenges. This study assessed PHBV/TiO2 nanocomposites for packaging applications. Differential scanning calorimetry revealed reduced crystallinity and lower melting points with an increase in TiO2 content. Thermal stability improved at 1% and 3% TiO2, raising onset temperatures to 283 °C and 284 °C, respectively. Scanning electron microscopy and FTIR confirmed uniform nanoparticle dispersion without agglomeration. Tensile tests showed decreasing strength and modulus from 1% to 7% TiO2, with peak elongation at 3%, whereas viscosity behavior declined with higher nanoparticle loading. Low portions of nanoparticles (1% and 3%) induced the improvement in barrier properties against oxygen and water vapor. The highest biodegradation rate occurred at 7% TiO2. Overall, the nanocomposites’ properties tend to deteriorate with the addition of higher portions of TiO2. Thus, despite some improvements, the nanocomposites did not deliver consistent, multi-property enhancements to justify use in food packaging. Key metrics like sealability and appearance were not evaluated. Future research should explore surface-treated TiO2, alternative fillers, compatibilizers, and optimized processing, alongside standardized safety assessments for food-contact applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, 10000 Zagreb, Croatia.
ORCID-Profile: Dajana Kučić Grgić, Vesna Ocelić Bulatović
Förderung
- National Recovery and Resilience Plan
Zitieren
APA
Grgurević, K., Nikolić, M. M., Kučić Grgić, D., & Bulatović, V. O. (2025). Thermal, Mechanical, and Barrier Properties of PHBV Nanocomposites via TiO2 Incorporation for Sustainable Food Packaging. Polymers, 18(1), 11. https://doi.org/10.3390/polym18010011
Vancouver
Grgurević K, Nikolić MM, Kučić Grgić D, Bulatović VO. Thermal, Mechanical, and Barrier Properties of PHBV Nanocomposites via TiO2 Incorporation for Sustainable Food Packaging. Polymers. 2025;18(1):11. doi:10.3390/polym18010011
BibTeX
@article{Grgurevi2025,
author = {Grgurević, Karlo and Nikolić, Martina Miloloža and Kučić Grgić, Dajana and Bulatović, Vesna Ocelić},
title = {Thermal, Mechanical, and Barrier Properties of PHBV Nanocomposites via TiO2 Incorporation for Sustainable Food Packaging},
journal = {Polymers},
year = {2025},
volume = {18},
number = {1},
pages = {11},
doi = {10.3390/polym18010011}
}
EUVIMED