EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Printing of Personalized Carbamazepine Tablets Using Hydrophilic Polymers: An Investigation of Correlation Between Dissolution Kinetics and Printing Parameters

Lianghao Huang, Xingyue Zhang, Qichen Huang, Minqing Zhu, Tiantian Yang, Jiaxiang Zhang

Polymers · 01.08.2025 · 17 (15) · 2126

DOI: 10.3390/polym17152126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.08.2025. Verfasst von Lianghao Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Marine Drugs, Ministry of Education, School of Medicine and Pharmacy, Ocean University of China, Qingdao 266003, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taishan Scholar Foundation of Shandong Province, Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Precision medicine refers to the formulation of personalized drug regimens according to the individual characteristics of patients to achieve optimal efficacy and minimize adverse reactions. Additive manufacturing (AM), also known as three-dimensional (3D) printing, has emerged as an optimal solution for precision drug delivery, enabling customizable and the fabrication of multifunctional structures with precise control over morphology and release behavior in pharmaceutics. However, the influence of 3D printing parameters on the printed tablets, especially regarding in vitro and in vivo performance, remains poorly understood, limiting the optimization of manufacturing processes for controlled-release profiles.

Objective

To establish the fabrication process of 3D-printed controlled-release tablets via comprehensively understanding the printing parameters using fused deposition modeling (FDM) combined with hot-melt extrusion (HME) technologies. HPMC-AS/HPC-EF was used as the drug delivery matrix and carbamazepine (CBZ) was used as a model drug to investigate the in vitro drug delivery performance of the printed tablets. Methodology: Thermogravimetric analysis (TGA) was employed to assess the thermal compatibility of CBZ with HPMC-AS/HPC-EF excipients up to 230 °C, surpassing typical processing temperatures (160–200 °C). The formation of stable amorphous solid dispersions (ASDs) was validated using differential scanning calorimetry (DSC), hot-stage polarized light microscopy (PLM), and powder X-ray diffraction (PXRD). A 15-group full factorial design was then used to evaluate the effects of the fan speed (20–100%), platform temperature (40–80 °C), and printing speed (20–100 mm/s) on the tablet properties. Response surface modeling (RSM) with inverse square-root transformation was applied to analyze the dissolution kinetics, specifically t50% (time for 50% drug release) and Q4h (drug released at 4 h).

Results

TGA confirmed the thermal compatibility of CBZ with HPMC-AS/HPC-EF, enabling stable ASD formation validated by DSC, PLM, and PXRD. The full factorial design revealed that printing speed was the dominant parameter governing dissolution behavior, with high speeds accelerating release and low speeds prolonging release through porosity-modulated diffusion control. RSM quadratic models showed optimal fits for t50% (R2 = 0.9936) and Q4h (R2 = 0.9019), highlighting the predictability of release kinetics via process parameter tuning. This work demonstrates the adaptability of polymer composite AM for tailoring drug release profiles, balancing mechanical integrity, release kinetics, and manufacturing scalability to advance multifunctional 3D-printed drug delivery devices in pharmaceutics.

Schlagwörter

Stichwörter der Autor:innen

Box–Behnken designFDM-3D printing parameteramorphous solid dispersioncarbamazepinehot-melt extrusion

Autor:innen und Institutionen

  • Key Laboratory of Marine Drugs, Ministry of Education, School of Medicine and Pharmacy, Ocean University of China, Qingdao 266003, China.
  • Pharmaceutical Products Research and Development Center, Marine Biomedical Research Institute of Qingdao, Qingdao 266137, China.
  • Material Characterization, Thermo Fisher Scientific, Shanghai 201203, China.

Förderung

  • Taishan Scholar Foundation of Shandong Province
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Huang, L., Zhang, X., Huang, Q., Zhu, M., Yang, T., & Zhang, J. (2025). Three-Dimensional Printing of Personalized Carbamazepine Tablets Using Hydrophilic Polymers: An Investigation of Correlation Between Dissolution Kinetics and Printing Parameters. Polymers, 17(15), 2126. https://doi.org/10.3390/polym17152126

Vancouver

Huang L, Zhang X, Huang Q, Zhu M, Yang T, Zhang J. Three-Dimensional Printing of Personalized Carbamazepine Tablets Using Hydrophilic Polymers: An Investigation of Correlation Between Dissolution Kinetics and Printing Parameters. Polymers. 2025;17(15):2126. doi:10.3390/polym17152126

BibTeX
@article{Huang2025,
  author = {Huang, Lianghao and Zhang, Xingyue and Huang, Qichen and Zhu, Minqing and Yang, Tiantian and Zhang, Jiaxiang},
  title = {Three-Dimensional Printing of Personalized Carbamazepine Tablets Using Hydrophilic Polymers: An Investigation of Correlation Between Dissolution Kinetics and Printing Parameters},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2126},
  doi = {10.3390/polym17152126}
}
Kostenlos starten →