EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dimensional Accuracy of Different Three-Dimensional Printing Models as a Function of Varying the Printing Parameters

Christin Arnold, Lea Riß, Jeremias Hey, Ramona Schweyen

Materials · 22.07.2024 · 17 (14) · 3616

DOI: 10.3390/ma17143616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.07.2024. Verfasst von Christin Arnold und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Martin-Luther-University Halle-Wittenberg, Magdeburger Str. 16, 06112 Halle, Germany. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Even in digital workflows, models are required for fitting during the fabrication of dental prostheses. This study examined the influence of different parameters on the dimensional accuracy of three-dimensionally printed models. A stereolithographic data record was generated from a master model (SOLL). With digital light processing (DLP) and stereolithography (SLA) printing systems, 126 models were produced in several printing runs—SolFlex350 (S) (DLP, n = 24), CaraPrint 4.0 (C) (DLP, n = 48) and Form2 (F) (SLA, n = 54)—and their accuracy was compared with plaster and milled polyurethane models. In addition to the positioning on the build platform, a distinction was made between parallel and across arrangement of the models to the printer’s front, solid and hollow models, and printing with and without support structures. For accuracy assessment, five measurement sections were defined on the model (A–E) and measured using a calibrated digital calliper and digital scans in combination with the GOM Inspect Professional software 2021. The mean deviation between the measurement methods for all distances was 79 µm. The mean deviation of the models from the digital SOLL model were 207.1 µm for the S series, 25.1 µm for the C series and 141.8 µm for the F series. While positioning did not have an influence, there were clinically relevant differences mainly regarding the choice of printer, but also individually in alignment, model structure and support structures.

Schlagwörter

Stichwörter der Autor:innen

3D printingdental modeldimensional accuracysupport structure

Autor:innen und Institutionen

  • Department of Prosthodontics, Martin-Luther-University Halle-Wittenberg, Magdeburger Str. 16, 06112 Halle, Germany.

Zitieren

APA

Arnold, C., Riß, L., Hey, J., & Schweyen, R. (2024). Dimensional Accuracy of Different Three-Dimensional Printing Models as a Function of Varying the Printing Parameters. Materials, 17(14), 3616. https://doi.org/10.3390/ma17143616

Vancouver

Arnold C, Riß L, Hey J, Schweyen R. Dimensional Accuracy of Different Three-Dimensional Printing Models as a Function of Varying the Printing Parameters. Materials. 2024;17(14):3616. doi:10.3390/ma17143616

BibTeX
@article{Arnold2024,
  author = {Arnold, Christin and Riß, Lea and Hey, Jeremias and Schweyen, Ramona},
  title = {Dimensional Accuracy of Different Three-Dimensional Printing Models as a Function of Varying the Printing Parameters},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {14},
  pages = {3616},
  doi = {10.3390/ma17143616}
}
Kostenlos starten →