Polyamide 6 as a Liner Material for Type IV Hydrogen Storage Cylinders: Performance Challenges and Modification Strategies
Polymers · 01.07.2025 · 17 (13) · 1848
DOI: 10.3390/polym17131848 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 01.07.2025. Verfasst von Wenyan Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Sichuan Special Equipment Inspection Institute, Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Adminis…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the open subject from Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Administration for Market Regulation, Science and Technology Plan Project of Administration for Market Regulation of Sichuan Province, Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Administration for Market Regulation.
Abstract (Originalsprache)
Type IV hydrogen storage cylinders are pivotal for high-pressure hydrogen storage and transportation, offering advantages such as lightweight design, high hydrogen storage density, and cost efficiency. Polyamide 6 (PA6) has emerged as a promising liner material due to its excellent mechanical strength, chemical resistance, and gas barrier properties. However, challenges remain, including high hydrogen permeability and insufficient mechanical performance under extreme temperature and pressure conditions. This review systematically summarizes recent advances in modification strategies to enhance PA6’s suitability for Type IV hydrogen storage cylinders. Incorporating nanofillers (e.g., graphene, montmorillonite, and carbon nanotubes) significantly reduces hydrogen permeability. In situ polymerization and polymer blending techniques improve toughness and interfacial adhesion (e.g., ternary blends achieve a special increase in impact strength). Multiscale structural design (e.g., biaxial stretching) and process optimization further enhance PA6’s overall performance. Future research should focus on interdisciplinary innovation, standardized testing protocols, and industry–academia collaboration to accelerate the commercialization of PA6-based composites for hydrogen storage applications. This review provides theoretical insights and engineering guidelines for developing high-performance liner materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Sichuan Special Equipment Inspection Institute, Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Administration for Market Regulation, Chengdu 610000, China.
- Key Laboratory of Materials and Surface Technology (Ministry of Education), School of Materials Science and Engineering, Engineering Research Center of Intelligent Air-Ground Integration Vehicle and Control, Xihua Unive…
- China Southwest Architectural Design and Research Institute Corp., Ltd., Chengdu 610041, China.
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China.
ORCID-Profile: Rui Han
Förderung
- the open subject from Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Administration for Market Regulation
- Science and Technology Plan Project of Administration for Market Regulation of Sichuan Province
- Technology Innovation Center of Hydrogen Storage-Transportation and Fueling Equipments, State Administration for Market Regulation
Zitieren
APA
Wang, W., Zhao, G., Ma, X., Ren, D., Nie, M., & Han, R. (2025). Polyamide 6 as a Liner Material for Type IV Hydrogen Storage Cylinders: Performance Challenges and Modification Strategies. Polymers, 17(13), 1848. https://doi.org/10.3390/polym17131848
Vancouver
Wang W, Zhao G, Ma X, Ren D, Nie M, Han R. Polyamide 6 as a Liner Material for Type IV Hydrogen Storage Cylinders: Performance Challenges and Modification Strategies. Polymers. 2025;17(13):1848. doi:10.3390/polym17131848
BibTeX
@article{Wang2025,
author = {Wang, Wenyan and Zhao, Guanxi and Ma, Xiao and Ren, Dengxun and Nie, Min and Han, Rui},
title = {Polyamide 6 as a Liner Material for Type IV Hydrogen Storage Cylinders: Performance Challenges and Modification Strategies},
journal = {Polymers},
year = {2025},
volume = {17},
number = {13},
pages = {1848},
doi = {10.3390/polym17131848}
}
EUVIMED