EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels

Dávid István Kis iD, Attila Bata, János Takács, Eszter Kókai iD

Nanomaterials · 25.08.2024 · 14 (17) · 1385

DOI: 10.3390/nano14171385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 25.08.2024. Verfasst von Dávid István Kis und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Automotive Technologies, Faculty of Transportation Engineering and Vehicle Engineering, Budapest University of Technology and Economics…. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recovery and Resilience Facility of the European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on polyamide 6/organo-modified montmorillonite (PA6/OMMT) nanocomposites as potential liner materials, given the growing interest in enhancing the performance of type IV composite overwrapped hydrogen storage pressure vessels. The mechanical properties of PA6/OMMT composites with varying filler concentrations were investigated across a temperature range relevant to hydrogen storage conditions (−40 °C to +85 °C). Liner collapse, a critical issue caused by rapid gas discharge, was analyzed using an Ishikawa diagram to identify external and internal factors. Mechanical testing revealed that higher OMMT content generally increased stiffness, especially at elevated temperatures. The Young’s modulus and first yield strength exhibited non-linear temperature dependencies, with 1 wt. per cent OMMT content enhancing yield strength at all tested temperatures. Dynamic mechanical analysis (DMA) indicated that OMMT improves the storage modulus, suggesting effective filler dispersion, but it also reduces the toughness and heat resistance, as evidenced by lower glass transition temperatures. This study underscores the importance of optimizing OMMT content to balance mechanical performance and thermal stability for the practical application of PA6/OMMT nanocomposites in hydrogen storage pressure vessels.

Schlagwörter

Stichwörter der Autor:innen

dynamic mechanical propertyhydrogen pressure vesselnanocompositeorganoclaypolyamide 6

Autor:innen und Institutionen

  • Department of Automotive Technologies, Faculty of Transportation Engineering and Vehicle Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3, H-1111 Budapest, Hungary.
  • Department of Innovative Vehicles and Materials, GAMF Faculty of Mechanical Engineering and Computer Science, John von Neumann University, H-6000 Kecskemét, Hungary.
  • Department of Applied Sustainability, Széchenyi István University, Egyetem tér 1, 9026 Győr, Hungary.

ORCID-Profile: Dávid István Kis, Eszter Kókai

Förderung

  • Recovery and Resilience Facility of the European Union

Zitieren

APA

Kis, D. I., Bata, A., Takács, J., & Kókai, E. (2024). Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels. Nanomaterials, 14(17), 1385. https://doi.org/10.3390/nano14171385

Vancouver

Kis DI, Bata A, Takács J, Kókai E. Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels. Nanomaterials. 2024;14(17):1385. doi:10.3390/nano14171385

BibTeX
@article{Kis2024,
  author = {Kis, Dávid István and Bata, Attila and Takács, János and Kókai, Eszter},
  title = {Mechanical Properties of Clay-Reinforced Polyamide 6 Nanocomposite Liner Materials of Type IV Hydrogen Storage Vessels},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {17},
  pages = {1385},
  doi = {10.3390/nano14171385}
}
Kostenlos starten →