EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrogen Permeability of Polyamide 6 Used as Liner Material for Type IV On-Board Hydrogen Storage Cylinders

Chufeng Dong, Yitao Liu, Jiepu Li iD, Guangfu Bin, Chilou Zhou iD, Wulin Han, Xiang Li

Polymers · 10.09.2023 · 15 (18) · 3715

DOI: 10.3390/polym15183715 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.09.2023. Verfasst von Chufeng Dong und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Xiangtan 411201, China. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development program of China, Science and Technology Program of CSEI, Natural Science Foundation of Hunan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a commonly used liner material for fully reinforced, carbon-fiber-composite hydrogen storage cylinders, polyamide 6 (PA6) needs to meet the required hydrogen permeation index during use; otherwise, it may adversely affect the safe use of hydrogen storage cylinders. The hydrogen permeability of PA6 under different temperatures and pressures was tested, and the variations in its hydrogen permeability were investigated. Additionally, the hydrogen permeability of PA6, polyamide 11 (PA11), and high-density polyethylene (HDPE) at a temperature of 288 K and a pressure of 70 MPa was tested, and the differences in hydrogen permeability among these commonly used liner materials for type IV on-board hydrogen storage cylinders were studied. The results reported herein indicate that both the hydrogen permeability and diffusion coefficient of PA6 increase with rising test temperature but decrease with increasing pressure. The solubility coefficient of PA6 shows no significant change with varying test temperatures and pressures. At a test temperature of 288 K and a pressure of 70 MPa, among the three materials, PA6 has slightly stronger hydrogen permeation resistance than PA11, while HDPE has the least resistance. These research findings can serve as valuable reference data for evaluating the hydrogen permeability of liner materials.

Schlagwörter

Stichwörter der Autor:innen

diffusionhydrogen permeabilityhydrogen storage cylindersolubility

Autor:innen und Institutionen

  • Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Xiangtan 411201, China.
  • China Special Equipment Inspection and Research Institute, Beijing 100029, China.
  • Key Laboratory of Safety of Hydrogen Energy Storage and Transportation Equipment for State Market Regulation, Beijing 100029, China.
  • School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
  • Hydrosys (Beijing) Technology Co., Ltd., Beijing 102627, China.

ORCID-Profile: Jiepu Li, Chilou Zhou

Förderung

  • National Key Research and Development program of China
  • Science and Technology Program of CSEI
  • Natural Science Foundation of Hunan Province
  • CSEI secondary discipline

Zitieren

APA

Dong, C., Liu, Y., Li, J., Bin, G., Zhou, C., Han, W., & Li, X. (2023). Hydrogen Permeability of Polyamide 6 Used as Liner Material for Type IV On-Board Hydrogen Storage Cylinders. Polymers, 15(18), 3715. https://doi.org/10.3390/polym15183715

Vancouver

Dong C, Liu Y, Li J, Bin G, Zhou C, Han W, et al. Hydrogen Permeability of Polyamide 6 Used as Liner Material for Type IV On-Board Hydrogen Storage Cylinders. Polymers. 2023;15(18):3715. doi:10.3390/polym15183715

BibTeX
@article{Dong2023,
  author = {Dong, Chufeng and Liu, Yitao and Li, Jiepu and Bin, Guangfu and Zhou, Chilou and Han, Wulin and Li, Xiang},
  title = {Hydrogen Permeability of Polyamide 6 Used as Liner Material for Type IV On-Board Hydrogen Storage Cylinders},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {3715},
  doi = {10.3390/polym15183715}
}
Kostenlos starten →