Effect of Processing Parameters on the Printability and Mechano-Biological Properties of Polycaprolactone–Bioactive Glass Composites for 3D-Printed Scaffold Fabrication
Polymers · 03.06.2025 · 17 (11) · 1554
DOI: 10.3390/polym17111554 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 03.06.2025. Verfasst von José I Contreras Raggio und 7 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Padre Hurtado 750, Viña del Mar 2520000, Chile. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, “Agencia Nacional de Investigación y Desarrollo” (ANID) from the Government of Chile through the Research Project FONDECYT.
Abstract (Originalsprache)
Direct ink writing (DIW) is an attractive, extrusion-based, additive manufacturing method for fabricating scaffold structures with controlled porosity using custom composite inks. Polycaprolactone–bioactive glass (PCL-BG) inks have gained attention for bone applications, but optimizing the formulation and fabrication of PCL-BG-based inks for improved printability and desired mechano-biological properties remains a challenge. This study employs a two-step design to systematically evaluate the effect of three factors in terms of PCL-BG composite printability and mechano-biological properties: ink preparation (acetone or dichloromethane (DCM) as the solvent, and mechanical compounding), the extrusion temperature (90 °C, 110 °C, and 130 °C), and the BG content (0%, 10%, and 20% BG). Pure PCL was used as the control. Rheological, calorimetric, and thermo-gravimetric analyses were conducted before printing. Cylindrical scaffolds and solid wells were printed to evaluate the printability, mechanical properties, and cytocompatibility. The scaffold porosity and pore size were carefully examined. Mechanical tests demonstrated that composite formulations with added BG and higher printing temperatures increased the elastic modulus and yield strength. However, PCL-DCM-BG combinations exhibited increased brittleness with higher BG content. Despite concerns about the toxic solvent DCM, the cytocompatibility was comparable to pure PCL for all ink preparation methods. The results suggest that the interaction between the ink preparation solvent, the BG content, and the printing temperature is critical for material design and fabrication planning in bone tissue engineering applications, providing insights into optimizing PCL-BG composite ink formulations for 3D printing in bone tissue engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Padre Hurtado 750, Viña del Mar 2520000, Chile.
- Laboratories for Mechanical Systems Engineering, Swiss Federal Laboratories for Materials Science and Technology (EMPA), Überlandstrasse 129, 8600 Dübendorf, Switzerland.
- Facultad de Artes Liberales, Universidad Adolfo Ibáñez, Padre Hurtado 750, Viña del Mar 2520000, Chile.
- Laboratory for Cellulose & Wood Materials, EMPA, Swiss Federal Laboratories for Material Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland.
- Departamento de Ingeniería Química y Biotecnología, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Beauchef 851, Santiago 8370456, Chile.
- Faculty of Medicine, University of Bern, Rosenbühlgasse 27, 3010 Bern, Switzerland.
ORCID-Profile: José I Contreras Raggio, Carola Millán, Juan F Vivanco
Förderung
- Agencia Nacional de Investigación y Desarrollo
- “Agencia Nacional de Investigación y Desarrollo” (ANID) from the Government of Chile through the Research Project FONDECYT
Zitieren
APA
Contreras Raggio, J. I., Pardo, M., Núñez, P., Millán, C., Siqueira, G., Palza, H., Vivanco, J. F., & Aiyangar, A. K. (2025). Effect of Processing Parameters on the Printability and Mechano-Biological Properties of Polycaprolactone–Bioactive Glass Composites for 3D-Printed Scaffold Fabrication. Polymers, 17(11), 1554. https://doi.org/10.3390/polym17111554
Vancouver
Contreras Raggio JI, Pardo M, Núñez P, Millán C, Siqueira G, Palza H, et al. Effect of Processing Parameters on the Printability and Mechano-Biological Properties of Polycaprolactone–Bioactive Glass Composites for 3D-Printed Scaffold Fabrication. Polymers. 2025;17(11):1554. doi:10.3390/polym17111554
BibTeX
@article{ContrerasRaggio2025,
author = {Contreras Raggio, José I and Pardo, Miguel and Núñez, Pablo and Millán, Carola and Siqueira, Gilberto and Palza, Humberto and Vivanco, Juan F and Aiyangar, Ameet K},
title = {Effect of Processing Parameters on the Printability and Mechano-Biological Properties of Polycaprolactone–Bioactive Glass Composites for 3D-Printed Scaffold Fabrication},
journal = {Polymers},
year = {2025},
volume = {17},
number = {11},
pages = {1554},
doi = {10.3390/polym17111554}
}
EUVIMED