EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Polycaprolactone/Hydroxyapatite Bionic Scaffold for Bone Regeneration

Feng-Ze Wang iD, Shuo Liu, Min Gao iD, Yao Yu, Wen-Bo Zhang iD, Hui Li, Xin Peng

Polymers · 23.03.2025 · 17 (7) · 858

DOI: 10.3390/polym17070858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2025. Verfasst von Feng-Ze Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology and National Center for Stomatology and National C…. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Beijing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The limitations of traditional, autologous bone grafts, such as the scarcity of donor material and the risks of secondary surgical trauma, have spurred the development of alternatives for the repair of large bone defects. Bionic bone scaffolds fabricated via fused deposition modeling (FDM)—a three-dimensional (3D) printing technique—are considered promising. While gyroid-structured scaffolds mimic the complex micro-architecture of cancellous bone, their application in FDM 3D printing remains understudied. Furthermore, no consensus has been reached on the ideal pore size for gyroid scaffolds, which is influenced by the infill density. In this study, we fabricated five groups of polycaprolactone/hydroxyapatite (PCL/HA) scaffolds with different infill densities (40%, 45%, 50%, 55%, and 60%) using a solvent-free filament preparation method. Scanning electron microscopy (SEM) observation showed that all scaffolds exhibit an interconnected porous structure. The scaffold with the 55% infill density, featuring a pore size of 465 ± 63 μm, demonstrated optimal hydrophilicity and mechanical properties comparable to natural cancellous bone. In addition, this scaffold supported cellular bridging within its pores and showed the highest alkaline phosphatase (ALP) activity and calcium salt deposition. Our findings offer novel insights into the design of gyroid-like scaffolds and their fabrication via FDM, paving the way for potential clinical applications.

Schlagwörter

Stichwörter der Autor:innen

bionic scaffoldbone formationgyroidhydroxyapatite (HA)polycaprolactone (PCL)three-dimensional printing

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology and National Center for Stomatology and National Clinical Research Center for Oral Diseases and National Engineering Res…
  • Department of VIP Dental Service, Department of Geriatric Dentistry, Peking University School and Hospital of Stomatology, Beijing 100081, China.
  • School of Systems Science and Institute of Nonequilibrium Systems, Beijing Normal University, Beijing 100875, China.

ORCID-Profile: Feng-Ze Wang, Min Gao, Wen-Bo Zhang

Förderung

  • Natural Science Foundation of Beijing

Zitieren

APA

Wang, F. Z., Liu, S., Gao, M., Yu, Y., Zhang, W. B., Li, H., & Peng, X. (2025). 3D-Printed Polycaprolactone/Hydroxyapatite Bionic Scaffold for Bone Regeneration. Polymers, 17(7), 858. https://doi.org/10.3390/polym17070858

Vancouver

Wang FZ, Liu S, Gao M, Yu Y, Zhang WB, Li H, et al. 3D-Printed Polycaprolactone/Hydroxyapatite Bionic Scaffold for Bone Regeneration. Polymers. 2025;17(7):858. doi:10.3390/polym17070858

BibTeX
@article{Wang2025,
  author = {Wang, Feng-Ze and Liu, Shuo and Gao, Min and Yu, Yao and Zhang, Wen-Bo and Li, Hui and Peng, Xin},
  title = {3D-Printed Polycaprolactone/Hydroxyapatite Bionic Scaffold for Bone Regeneration},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {858},
  doi = {10.3390/polym17070858}
}
Kostenlos starten →