EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration

Hosein Emadi, Mostafa Baghani iD, Maryam Masoudi Rad, Bahareh Hoomehr iD, Majid Baniassadi, Saeid Lotfian iD

Polymers · 13.05.2024 · 16 (10) · 1389

DOI: 10.3390/polym16101389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.05.2024. Verfasst von Hosein Emadi und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 14176-14411, Iran. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There is an essential clinical need to develop rapid process scaffolds to repair bone defects. The current research presented the development of calcium zirconium silicate/polycaprolactone for bone tissue engineering utilising melt extrusion-based 3D printing. Calcium zirconium silicate (CZS) nanoparticles were added to polycaprolactone (PCL) porous scaffolds to enhance their biological and mechanical properties, while the resulting properties were studied extensively. No significant difference was found in the melting point of the samples, while the crystallisation temperature points of the samples containing bioceramic increased from 36.1 to 40.2 °C. Thermal degradation commenced around 350 °C for all materials. According to our results, increasing the CZS content from 0 to 40 wt.% (PC40) in porous scaffolds (porosity about 55–62%) improved the compressive strength from 2.8 to 10.9 MPa. Furthermore, apatite formation ability in SBF solution increased significantly by enhancing the CZS percentage. According to MTT test results, the viability of MG63 cells improved remarkably (~29%) in PC40 compared to pure PCL. These findings suggest that a 3D-printed PCL/CZS composite scaffold can be fabricated successfully and shows great potential as an implantable material for bone tissue engineering applications.

Schlagwörter

Stichwörter der Autor:innen

PCLbioactivitycalcium zirconium silicatecytocompatibilityfused deposition modelling

Autor:innen und Institutionen

  • School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 14176-14411, Iran.
  • Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
  • Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
  • Faculty of Engineering, University of Strathclyde, Glasgow G4 0LZ, UK.

ORCID-Profile: Mostafa Baghani, Bahareh Hoomehr, Saeid Lotfian

Zitieren

APA

Emadi, H., Baghani, M., Masoudi Rad, M., Hoomehr, B., Baniassadi, M., & Lotfian, S. (2024). 3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration. Polymers, 16(10), 1389. https://doi.org/10.3390/polym16101389

Vancouver

Emadi H, Baghani M, Masoudi Rad M, Hoomehr B, Baniassadi M, Lotfian S. 3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration. Polymers. 2024;16(10):1389. doi:10.3390/polym16101389

BibTeX
@article{Emadi2024,
  author = {Emadi, Hosein and Baghani, Mostafa and Masoudi Rad, Maryam and Hoomehr, Bahareh and Baniassadi, Majid and Lotfian, Saeid},
  title = {3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {10},
  pages = {1389},
  doi = {10.3390/polym16101389}
}
Kostenlos starten →