EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing Wood–PLA Composites: The Impact of Wood Particle Size

Wojciech Jasiński iD, Karol Szymanowski iD, Barbara Nasiłowska iD, Marek Barlak iD, Izabela Betlej iD, Artur Prokopiuk iD, Piotr Borysiuk iD

Polymers · 25.04.2025 · 17 (9) · 1165

DOI: 10.3390/polym17091165 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.04.2025. Verfasst von Wojciech Jasiński und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences-SGGW, 159 Nowoursynowska St., 02-776 Warsaw, Poland. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Particle size of wood fillers used in FDM 3D printing filaments is a topic not commonly discussed in the literature. Research on traditional wood–polymer composites (WPCs) suggests that bigger particles improve the composite’s tensile properties. Is that the case at the 3D printing scale? Five variants of composites were prepared using recycled PLA and sawdust, differentiated by filler particle size (

Schlagwörter

Stichwörter der Autor:innen

FDMSEMnozzle sizeprintabilitytensile properties

Autor:innen und Institutionen

  • Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences-SGGW, 159 Nowoursynowska St., 02-776 Warsaw, Poland.
  • Institute of Optoelectronics, Military University of Technology, gen. S. Kaliskiego 2 St., 00-908 Warsaw, Poland.
  • Ion Beam Technology Division, Material Physics Department, National Centre for Nuclear Research Świerk, 7 Sołtana St., 05-400 Otwock, Poland.

ORCID-Profile: Wojciech Jasiński, Karol Szymanowski, Barbara Nasiłowska, Marek Barlak, Izabela Betlej, Artur Prokopiuk, Piotr Borysiuk

Zitieren

APA

Jasiński, W., Szymanowski, K., Nasiłowska, B., Barlak, M., Betlej, I., Prokopiuk, A., & Borysiuk, P. (2025). 3D Printing Wood–PLA Composites: The Impact of Wood Particle Size. Polymers, 17(9), 1165. https://doi.org/10.3390/polym17091165

Vancouver

Jasiński W, Szymanowski K, Nasiłowska B, Barlak M, Betlej I, Prokopiuk A, et al. 3D Printing Wood–PLA Composites: The Impact of Wood Particle Size. Polymers. 2025;17(9):1165. doi:10.3390/polym17091165

BibTeX
@article{Jasiski2025,
  author = {Jasiński, Wojciech and Szymanowski, Karol and Nasiłowska, Barbara and Barlak, Marek and Betlej, Izabela and Prokopiuk, Artur and Borysiuk, Piotr},
  title = {3D Printing Wood–PLA Composites: The Impact of Wood Particle Size},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {9},
  pages = {1165},
  doi = {10.3390/polym17091165}
}
Kostenlos starten →