EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing tensile strength of 3D-printed wood-PLA composites via a particle swarm optimization framework

Biplab Bhattacharjee iD, P Mathiyalagan, Koushik V Prasad, Dhirendra Nath Thatoi, Varinder Singh, G Senthil Kumar, Rajesh K iD, Jibitesh Kumar Panda iD

PLOS One · 24.03.2026 · 21 (3) · e0344945

DOI: 10.1371/journal.pone.0344945 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 24.03.2026. Verfasst von Biplab Bhattacharjee und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology, Chennai, TamilNadu, India. Hauptthemen laut MEDLINE: Polyesters, Wood, Tensile Strength, Printing, Three-Dimensional. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the evolving landscape of additive manufacturing, this study pioneers the optimization of FDM (Fused Deposition Modelling) parameters to enhance the tensile performance of eco-friendly Wood-PLA composites. Leveraging the systematic Taguchi L9 orthogonal array, the investigation explored the synergistic effects of three critical printing factors: layer thickness (0.1, 0.2, 0.3 mm), infill density (25%, 50%, 75%), and nozzle temperature (190°C, 200°C, 210°C), across distinct infill patterns such as Triangular, Cubic, and Zig-zag. Unique to this work is the strategic composition of the bio composite filament comprising 80% polylactic acid (PLA) reinforced with 20% wood fibres, reflecting a sustainable material innovation. The mechanical behaviour was characterized through ISO 527 tensile testing, while Scanning Electron Microscopy (SEM) provided microstructural insights into fibre distribution and interlayer bonding. The key optimized parameters layer thickness (0.1 mm), infill density (75%), nozzle temperature (210 °C), and cubic infill pattern are explicitly stated early, along with the corresponding maximum tensile strength of 46.41 MPa, as statistically validated by Analysis of Variance (ANOVA). The reported 28% improvement is now clearly defined as being relative to the average tensile strength of non-optimized printing configurations. This research advances the understanding of process-property relationships in bio composite 3D printing, offering a validated framework for fabricating mechanically robust, environmentally sustainable components. This study directly supports the Sustainable Development Goals (SDG 9: Industry, Innovation and Infrastructure; SDG 12: Responsible Consumption and Production) by promoting sustainable additive manufacturing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersWoodTensile StrengthPrinting, Three-DimensionalParticle Swarm OptimizationMaterials TestingTemperatureMicroscopy, Electron, Scanning

Substanzen

Polyesterspoly(lactide)

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology, Chennai, TamilNadu, India.
  • Department of Mechanical Engineering, J. J. College of Engineering and Technology, Tiruchirappalli, Tamil Nadu, India.
  • Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University), Bangalore, Karnataka, India.
  • Department of Mechanical Engineering, Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar, Odisha, India.
  • Sharda School of Engineering and Sciences, Sharda University, Greater Noida, Uttar Pradesh, India.
  • Department of Mechanical Engineering, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India.

ORCID-Profile: Biplab Bhattacharjee, Rajesh K, Jibitesh Kumar Panda

Zitieren

APA

Bhattacharjee, B., Mathiyalagan, P., Prasad, K. V., Thatoi, D. N., Singh, V., Kumar, G. S., K, R., & Panda, J. K. (2026). Enhancing tensile strength of 3D-printed wood-PLA composites via a particle swarm optimization framework. PLOS One, 21(3), e0344945. https://doi.org/10.1371/journal.pone.0344945

Vancouver

Bhattacharjee B, Mathiyalagan P, Prasad KV, Thatoi DN, Singh V, Kumar GS, et al. Enhancing tensile strength of 3D-printed wood-PLA composites via a particle swarm optimization framework. PLOS One. 2026;21(3):e0344945. doi:10.1371/journal.pone.0344945

BibTeX
@article{Bhattacharjee2026,
  author = {Bhattacharjee, Biplab and Mathiyalagan, P and Prasad, Koushik V and Thatoi, Dhirendra Nath and Singh, Varinder and Kumar, G Senthil and K, Rajesh and Panda, Jibitesh Kumar},
  title = {Enhancing tensile strength of 3D-printed wood-PLA composites via a particle swarm optimization framework},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {e0344945},
  doi = {10.1371/journal.pone.0344945}
}
Kostenlos starten →