EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization Scheme for 3D Printing of PLA–PHBV–PCL Biodegradable Blends for Use in Orthopedic Casting

Muhammad Mohid Aziz, Logan Beard, Shafahat Ali iD, Abdelkrem Eltaggaz iD, Ibrahim Deiab iD

Polymers · 22.03.2025 · 17 (7) · 852

DOI: 10.3390/polym17070852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.03.2025. Verfasst von Muhammad Mohid Aziz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Manufacturing Lab (AML), School of Engineering, University of Guelph, Guelph, ON N1G 2W1, Canada. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing technology offers significant advantages in the production of orthopedic casts, providing a promising alternative to conventional plaster and fiberglass materials. Polylactic acid (PLA) is widely used for this purpose; however, its adoption is limited due to poor mechanical properties, including high brittleness, low thermal stability, and limited elongation. These challenges can be mitigated by blending PLA with other biodegradable polymers. This study investigated a blend of PLA with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a type of polyhydroxyalkanoate (PHA), and polycaprolactone (PCL) for the development of 3D printed orthopedic casts. The key mechanical properties—tensile strength, percent elongation at break, Young’s modulus, flexural strength, flexural modulus, and impact strength—were evaluated as a function of the printing parameters, including nozzle temperature, layer height, and raster angle. The grey relational analysis (GRA) approach was applied to optimize these mechanical properties. The optimal printing parameters were found to be a nozzle temperature of 180 °C, a layer height of 0.18 mm, and a raster angle of 0°, resulting in a tensile strength of 44.4 ± 4.4 MPa, an elongation at break of 68.5 ± 11.6%, a Young’s modulus of 948.7 ± 25.1 MPa, a flexural strength of 54.6 ± 8.9 MPa, a flexural modulus of 1549.3 ± 141 MPa, and an impact strength of 80.77 ± 5.6 J/m. Statistical analysis using analysis of variance (ANOVA) revealed that for tensile strength, 50.18% was influenced by the raster angle, 26.38% by the layer height, and 18.92% by the nozzle temperature; for flexural strength, 69.81% was influenced by the raster angle, 20.67% by the layer height, and 3.53% by the nozzle temperature; and for impact strength, 75.11% was influenced by the raster angle, 13.16% by the layer height, and 4.45% by the nozzle temperature.

Schlagwörter

Stichwörter der Autor:innen

3D printingbioplasticsoptimizationorthopedic casting

Autor:innen und Institutionen

  • Advanced Manufacturing Lab (AML), School of Engineering, University of Guelph, Guelph, ON N1G 2W1, Canada.
  • Mechanical Engineering Department, Australian University of Kuwait, Kuwait City 13015, Kuwait.

ORCID-Profile: Shafahat Ali, Abdelkrem Eltaggaz, Ibrahim Deiab

Förderung

  • NSERC

Zitieren

APA

Aziz, M. M., Beard, L., Ali, S., Eltaggaz, A., & Deiab, I. (2025). Optimization Scheme for 3D Printing of PLA–PHBV–PCL Biodegradable Blends for Use in Orthopedic Casting. Polymers, 17(7), 852. https://doi.org/10.3390/polym17070852

Vancouver

Aziz MM, Beard L, Ali S, Eltaggaz A, Deiab I. Optimization Scheme for 3D Printing of PLA–PHBV–PCL Biodegradable Blends for Use in Orthopedic Casting. Polymers. 2025;17(7):852. doi:10.3390/polym17070852

BibTeX
@article{Aziz2025,
  author = {Aziz, Muhammad Mohid and Beard, Logan and Ali, Shafahat and Eltaggaz, Abdelkrem and Deiab, Ibrahim},
  title = {Optimization Scheme for 3D Printing of PLA–PHBV–PCL Biodegradable Blends for Use in Orthopedic Casting},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {852},
  doi = {10.3390/polym17070852}
}
Kostenlos starten →