EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Coffee Grounds Content on Properties of PHBV Biocomposites Compared to Similar Composites with Other Fillers

Grzegorz Janowski iD, Wiesław Frącz iD, Łukasz Bąk iD, Janusz W Sikora, Adam Tomczyk iD, Grażyna Mrówka-Nowotnik iD, Beata Mossety-Leszczak iD

Polymers · 14.03.2025 · 17 (6) · 764

DOI: 10.3390/polym17060764 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.03.2025. Verfasst von Grzegorz Janowski und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Forming and Processing, Rzeszow University of Technology, Powstancow Warszawy 8, 35-959 Rzeszow, Poland. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: INNOSPIN grant financed by the VIA CARPATIA Polytechnic Network named after the President of the Republic of Poland, Lech Kaczyński: PHBV - COFFEE WASTE BIOCOM…, VIA CARPATIA Polytechnic Network named after the President of the Republic of Poland, Lech Kaczyński.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spent coffee grounds (SCG) have potential as a sustainable bio-filler in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) composites, offering an environmentally friendly approach to waste utilization. This study investigated the effect of SCG content on the mechanical, thermal, and morphological properties of PHBV biocomposites and compared them with those of composites containing wood flour and hemp fibers. The biocomposites were fabricated via extrusion and injection molding, followed by the characterization of their mechanical performance, thermal behavior, and microstructure. The results indicated that SCG increased the stiffness of PHBV but did not enhance its tensile strength due to the weak interfacial adhesion between the filler and matrix. Unlike other lignocellulosic fillers, SCG requires lower processing temperatures, which is advantageous for thermally sensitive applications. SEM analysis revealed well-dispersed SCG particles at low concentrations, but visible aggregation and interfacial voids at higher loadings. While SCG serves as an effective and cost-efficient filler for improving the stiffness of PHBV, it does not reinforce the material in the conventional sense.

Schlagwörter

Stichwörter der Autor:innen

green polymershemp polymer compositesinjection molding technologyspent coffee grounds (SCG)wood polymer composites

Autor:innen und Institutionen

  • Department of Materials Forming and Processing, Rzeszow University of Technology, Powstancow Warszawy 8, 35-959 Rzeszow, Poland.
  • Department of Technology and Polymer Processing, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland.
  • Department of Mechanics and Applied Computer Science, Faculty of Mechanical Engineering, Białystok University of Technology, Wiejska 45C Str., 15-351 Białystok, Poland.
  • Department of Material Science, Rzeszow University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland.
  • Department of Industrial and Materials Chemistry, Rzeszow University of Technology, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland.

ORCID-Profile: Grzegorz Janowski, Wiesław Frącz, Łukasz Bąk, Adam Tomczyk, Grażyna Mrówka-Nowotnik, Beata Mossety-Leszczak

Förderung

  • INNOSPIN grant financed by the VIA CARPATIA Polytechnic Network named after the President of the Republic of Poland, Lech Kaczyński: PHBV - COFFEE WASTE BIOCOM…
  • VIA CARPATIA Polytechnic Network named after the President of the Republic of Poland, Lech Kaczyński

Zitieren

APA

Janowski, G., Frącz, W., Bąk, Ł., Sikora, J. W., Tomczyk, A., Mrówka-Nowotnik, G., & Mossety-Leszczak, B. (2025). Effect of Coffee Grounds Content on Properties of PHBV Biocomposites Compared to Similar Composites with Other Fillers. Polymers, 17(6), 764. https://doi.org/10.3390/polym17060764

Vancouver

Janowski G, Frącz W, Bąk Ł, Sikora JW, Tomczyk A, Mrówka-Nowotnik G, et al. Effect of Coffee Grounds Content on Properties of PHBV Biocomposites Compared to Similar Composites with Other Fillers. Polymers. 2025;17(6):764. doi:10.3390/polym17060764

BibTeX
@article{Janowski2025,
  author = {Janowski, Grzegorz and Frącz, Wiesław and Bąk, Łukasz and Sikora, Janusz W and Tomczyk, Adam and Mrówka-Nowotnik, Grażyna and Mossety-Leszczak, Beata},
  title = {Effect of Coffee Grounds Content on Properties of PHBV Biocomposites Compared to Similar Composites with Other Fillers},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {6},
  pages = {764},
  doi = {10.3390/polym17060764}
}
Kostenlos starten →