Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments
Polymer Composites · 10.11.2024 · 45 (16) · 14566-14579
DOI: 10.1002/pc.28782 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 18.07.2024. Verfasst von Silvia Lage‐Rivera und 4 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministerio de Ciencia e Innovación.
Abstract (Originalsprache)
Material extrusion additive manufacturing is increasingly popular but requires new materials to expand its industrial applicability. This study compares the effects of two bio‐fillers (lignin and spent coffee grounds (SCG)) in a bio‐polymer matrix, polylactic acid (PLA). The bio‐fillers aim to enhance the sustainability of the resulting composites, tune their physical properties (rheology, thermal stability, mechanical resistance and water absorption) and improve 3D‐printability by reducing the temperature at the nozzle. The composite with 15 wt.% SCG exhibited an elongation at break of 22.95% (vs. 8.42% for PLA), a printing temperature of 180°C (vs. 215°C for PLA) and a water absorption after 6 weeks immersion in water of 18.77 wt.% (vs. 5.04 wt.% of PLA), suggesting applications like hydroponic farming. Moreover, small amounts of SCG protected the composite against thermo‐oxidative degradation during extrusion, while lignin enhanced the thermal stability of the composite. Highlights 15 wt.% SCG improved PLA ductility (elongation at break 22.9% vs. PLA's 8.4%). Lower printing temperature (180 vs. 215°C for PLA) was achieved with 15 wt.% SCG. SCG protects composite from thermo‐oxidative degradation. 15 wt.% SCG in PLA absorbs 18.77% water after 6 weeks (vs. 5.04% of PLA). Lignin boosts thermal stability of PLA composite.
Förderung
- Ministerio de Ciencia e Innovación
Zitieren
APA
Lage‐Rivera, S., Ares‐Pernas, A., Dopico‐García, M. S., Covas, J., & Abad, M. (2024). Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments. Polymer Composites, 45(16), 14566-14579. https://doi.org/10.1002/pc.28782
Vancouver
Lage‐Rivera S, Ares‐Pernas A, Dopico‐García MS, Covas J, Abad M. Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments. Polymer Composites. 2024;45(16):14566-14579. doi:10.1002/pc.28782
BibTeX
@article{LageRivera2024,
author = {Lage‐Rivera, Silvia and Ares‐Pernas, Ana and Dopico‐García, M. Sonia and Covas, José and Abad, María‐José},
title = {Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments},
journal = {Polymer Composites},
year = {2024},
volume = {45},
number = {16},
pages = {14566--14579},
doi = {10.1002/pc.28782}
}
EUVIMED