The Influence of Sunflower Seed Hull Content on the Mechanical, Thermal, and Functional Properties of PHBV-Based Biocomposites
Materials · 08.01.2026 · 19 (2) · 268
DOI: 10.3390/ma19020268 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.01.2026. Verfasst von Grzegorz Janowski und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Forming and Processing, Rzeszow University of Technology, Powstańców Warszawy 8, 35-959 Rzeszów, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish National Science Centre.
Abstract (Originalsprache)
This paper presents the potential use of sunflower seed hulls (SSH) as a sustainable filler for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) biocomposites. Ground SSH were incorporated into the PHBV matrix at loadings of 15, 30, and 45 wt% via extrusion and injection molding. The Fourier Transform Infrared Spectroscopy (FTIR) analysis indicated the presence of possible interactions between the filler and the matrix. Mechanical testing revealed a significant increase in stiffness, with the tensile modulus increasing from 2.6 GPa for pure PHBV to approximately 4.5 GPa for the composite containing 45 wt% SSH. However, the tensile strength decreased by approximately 10–40%, while elongation at break dropped to 1.0–1.5%, depending on the SSH dosage, respectively. The thermal analysis indicated that high filler contents suppress crystallization during cooling under laboratory conditions in Differential Scanning Calorimetry (DSC) analysis due to the confinement effect. The key practical advantage is the exceptional improvement in dimensional stability with a processing shrinkage reduction of approximately 80% in the thickness direction. Although water absorption increased with filler loading, biocomposites containing 15–30 wt% SSH exhibited the optimal balance of high stiffness, hardness, and dimensional accuracy. These properties make the developed material a promising option for the production of precise technical molded parts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Forming and Processing, Rzeszow University of Technology, Powstańców Warszawy 8, 35-959 Rzeszów, Poland.
- Department of Organic Technology, University of Split, Ruđera Boškovića 35, 21 000 Split, Croatia.
- Department of Technology, Materials and Computer Aided Production, Technical University of Košice, Mäsiarska 74, 04001 Košice, Slovakia.
ORCID-Profile: Grzegorz Janowski, Marta Wójcik, Irena Krešić, Wiesław Frącz, Łukasz Bąk, Ivan Gajdoš, Emil Spišák
Förderung
- Polish National Science Centre
Zitieren
APA
Janowski, G., Wójcik, M., Krešić, I., Frącz, W., Bąk, Ł., Gajdoš, I., & Spišák, E. (2026). The Influence of Sunflower Seed Hull Content on the Mechanical, Thermal, and Functional Properties of PHBV-Based Biocomposites. Materials, 19(2), 268. https://doi.org/10.3390/ma19020268
Vancouver
Janowski G, Wójcik M, Krešić I, Frącz W, Bąk Ł, Gajdoš I, et al. The Influence of Sunflower Seed Hull Content on the Mechanical, Thermal, and Functional Properties of PHBV-Based Biocomposites. Materials. 2026;19(2):268. doi:10.3390/ma19020268
BibTeX
@article{Janowski2026,
author = {Janowski, Grzegorz and Wójcik, Marta and Krešić, Irena and Frącz, Wiesław and Bąk, Łukasz and Gajdoš, Ivan and Spišák, Emil},
title = {The Influence of Sunflower Seed Hull Content on the Mechanical, Thermal, and Functional Properties of PHBV-Based Biocomposites},
journal = {Materials},
year = {2026},
volume = {19},
number = {2},
pages = {268},
doi = {10.3390/ma19020268}
}
EUVIMED