EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials

Xueman Lv, Shuo Wang, Zihe Xu, Xuanting Liu, Guoqin Liu, Feipeng Cao, Yunhai Ma

Biomimetics · 19.04.2023 · 8 (2) · 166

DOI: 10.3390/biomimetics8020166 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 19.04.2023. Verfasst von Xueman Lv und 6 weiteren Autor:innen. Beteiligte Einrichtung: The College of Biological and Agricultural Engineering, Jilin University, 5988 Renmin Street, Changchun 130025, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jilin Province Education Department 135, Project the Foundation for Development of Science and Technology of Changchun.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the primary challenges in developing bone substitutes is to create scaffolds with mechanical properties that closely mimic those of regenerated tissue. Scaffolds that mimic the structure of natural cancellous bone are believed to have better environmental adaptability. In this study, we used the porosity and thickness of pig cancellous bone as biomimetic design parameters, and porosity and structural shape as differential indicators, to design a biomimetic bone beam scaffold. The mechanical properties of the designed bone beam model were tested using the finite element method (FEM). PCL/β-TCP porous scaffolds were prepared using the FDM method, and their mechanical properties were tested. The FEM simulation results were compared and validated, and the effects of porosity and pore shape on the mechanical properties were analyzed. The results of this study indicate that the PCL/β-TCP scaffold, prepared using FDM 3D printing technology for cancellous bone tissue engineering, has excellent integrity and stability. Predicting the structural stability using FEM is effective. The triangle pore structure has the most stability in both simulations and tests, followed by the rectangle and honeycomb shapes, and the diamond structure has the worst stability. Therefore, adjusting the porosity and pore shape can change the mechanical properties of the composite scaffold to meet the mechanical requirements of customized tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

3D printingPCLTCPbone scaffoldfinite element methodmechanical property analysis

Autor:innen und Institutionen

  • The College of Biological and Agricultural Engineering, Jilin University, 5988 Renmin Street, Changchun 130025, China.
  • Department of Ophthalmology, China-Japan Union Hospital of Jilin University, Changchun 130031, China.

Förderung

  • National Natural Science Foundation of China
  • Jilin Province Education Department 135
  • Project the Foundation for Development of Science and Technology of Changchun
  • the Foundation for Development of Science and Technology of Jilin Province
  • Foundation for Development of Science and Technology of Jilin Province

Zitieren

APA

Lv, X., Wang, S., Xu, Z., Liu, X., Liu, G., Cao, F., & Ma, Y. (2023). Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials. Biomimetics, 8(2), 166. https://doi.org/10.3390/biomimetics8020166

Vancouver

Lv X, Wang S, Xu Z, Liu X, Liu G, Cao F, et al. Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials. Biomimetics. 2023;8(2):166. doi:10.3390/biomimetics8020166

BibTeX
@article{Lv2023,
  author = {Lv, Xueman and Wang, Shuo and Xu, Zihe and Liu, Xuanting and Liu, Guoqin and Cao, Feipeng and Ma, Yunhai},
  title = {Structural Mechanical Properties of 3D Printing Biomimetic Bone Replacement Materials},
  journal = {Biomimetics},
  year = {2023},
  volume = {8},
  number = {2},
  pages = {166},
  doi = {10.3390/biomimetics8020166}
}
Kostenlos starten →