EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of PLA/LW-PLA Composite Materials Manufactured by Dual-Nozzle FDM 3D-Printing Processes

Ye-Eun Park, Sunhee Lee iD

Polymers · 10.10.2024 · 16 (20) · 2852

DOI: 10.3390/polym16202852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.10.2024. Verfasst von Ye-Eun Park und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fashion and Textiles, Dong-A University, Busan 49315, Republic of Korea. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NRF, National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the properties of 3D-printed composite structures made from polylactic acid (PLA) and lightweight-polylactic acid (LW-PLA) filaments using dual-nozzle fused-deposition modeling (FDM) 3D printing. Composite structures were modeled by creating three types of cubes: (i) ST4—built with a total of four alternating layers of the two filaments in the z-axis, (ii) ST8—eight alternating layers of the two filaments, and (iii) CH4—a checkered pattern with four alternating divisions along the x, y, and z axes. Each composite structure was analyzed for printing time and weight, morphology, and compressive properties under varying nozzle temperatures and infill densities. Results indicated that higher nozzle temperatures (230 °C and 240 °C) activate foaming, particularly in ST4 and ST8 at 100% infill density. These structures were 103.5% larger on one side than the modeled dimensions and up to 9.25% lighter. The 100% infill density of ST4-Com-PLA/LW-PLA-240 improved toughness by 246.5% due to better pore compression. The ST4 and ST8 cubes exhibited decreased stiffness with increasing temperatures, while CH4 maintained consistent compressive properties across different conditions. This study confirmed that the characteristics of LW-PLA become more pronounced as the material is printed continuously, with ST4 showing the strongest effect, followed by ST8 and CH4. It highlights the importance of adjusting nozzle temperature and infill density to control foaming, density, and mechanical properties. Overall optimal conditions are 230 °C and 50% infill density, which provide a balance of strength and toughness for applications.

Schlagwörter

Stichwörter der Autor:innen

composite materialscompressive propertydual-nozzle extrusionfused deposition modeling (FDM) 3D printinglightweight polylactic acid

Autor:innen und Institutionen

  • Department of Fashion and Textiles, Dong-A University, Busan 49315, Republic of Korea.
  • Department of Fashion Design, Dong-A University, Busan 49315, Republic of Korea.

ORCID-Profile: Sunhee Lee

Förderung

  • NRF
  • National Research Foundation of Korea (NRF)

Zitieren

APA

Park, Y. E., & Lee, S. (2024). Characterization of PLA/LW-PLA Composite Materials Manufactured by Dual-Nozzle FDM 3D-Printing Processes. Polymers, 16(20), 2852. https://doi.org/10.3390/polym16202852

Vancouver

Park YE, Lee S. Characterization of PLA/LW-PLA Composite Materials Manufactured by Dual-Nozzle FDM 3D-Printing Processes. Polymers. 2024;16(20):2852. doi:10.3390/polym16202852

BibTeX
@article{Park2024,
  author = {Park, Ye-Eun and Lee, Sunhee},
  title = {Characterization of PLA/LW-PLA Composite Materials Manufactured by Dual-Nozzle FDM 3D-Printing Processes},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {20},
  pages = {2852},
  doi = {10.3390/polym16202852}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche