EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene

Michael Dawoud iD, Iman Taha

Polymers · 2024-08-14 · 16 (16) · 2301

DOI: 10.3390/polym16162301 ↗

At a glance

Journal article in Polymers, published online on 2024-08-14. Written by Michael Dawoud and 1 co-authors. Institution: Sustainable Materials in Polymer Engineering, Aalen University, Beethovenstraße 1, 73430 Aalen, Germany. Cited 11 times so far (Crossref); 71 references. The full text is freely available (open access, CC BY 4.0). Funded by: Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz, Aalen University of Applied Sciences, Federal Ministry for the Environment, Nature Conservation, Nuclear Safety and Consumer Protection, Germany.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The effect of contamination of polypropylene (PP) with selected polymers is studied to simulate the effect of mis-sorting in recycling streams. Polystyrene (PS), polyethylene terephthalate (PET), polycarbonate (PC), acrylonitrile butadiene styrene (ABS), and polylactic acid (PLA) were compounded with PP at different concentrations varying between 3 and 10%. Infrared spectroscopy proved the absence of chemical bonds between the constituents. Generally, melt flowability, except for the PP/PLA blend, and crystallinity were only slightly affected by the incorporation of the contaminating polymers. Samples of the polymer blends were injection moulded and further tested for their tensile and impact properties. Critical behaviour was induced by the introduction of a weld line as a result of the application of multiple gating points during injection moulding. Results generally show the applicability of PP mixtures within the investigated range of contamination, without much sacrifice in mechanical performance. However, in the case of ABS and PLA, more care should be taken when designing complex parts with weld lines, due to reduced toughness.

Subjects

Author keywords

mechanical behaviourmelt volume ratemis-sortingpolypropylenerecycling

Authors and institutions

  • Sustainable Materials in Polymer Engineering, Aalen University, Beethovenstraße 1, 73430 Aalen, Germany.

ORCID profiles: Michael Dawoud

Funding

  • Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz
  • Aalen University of Applied Sciences
  • Federal Ministry for the Environment, Nature Conservation, Nuclear Safety and Consumer Protection, Germany

Cite

APA

Dawoud, M., & Taha, I. (2024). Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene. Polymers, 16(16), 2301. https://doi.org/10.3390/polym16162301

Vancouver

Dawoud M, Taha I. Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene. Polymers. 2024;16(16):2301. doi:10.3390/polym16162301

BibTeX
@article{Dawoud2024,
  author = {Dawoud, Michael and Taha, Iman},
  title = {Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {16},
  pages = {2301},
  doi = {10.3390/polym16162301}
}
Start for free →