Properties of Composites Based on Recycled Polypropylene and Silico-Aluminous Industrial Waste
Polymers · 31.05.2023 · 15 (11) · 2545
DOI: 10.3390/polym15112545 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.05.2023. Verfasst von George-Mihail Teodorescu und 8 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Research & Development in Chemistry and Petrochemistry-ICECHIM, 202 Spl. Independentei, 060021 Bucharest, Romania. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Cohesion Fund-European Union, POC-A1-A1.2.3-G-2015- P_40_352SECVENT, European Union.
Abstract (Originalsprache)
There is an ever-growing interest in recovering and recycling waste materials due to their hazardous nature to the environment and human health. Recently, especially since the beginning of the COVID-19 pandemic, disposable medical face masks have been a major source of pollution, hence the rise in studies being conducted on how to recover and recycle this waste. At the same time, fly ash, an aluminosilicate waste, is being repurposed in various studies. The general approach to recycling these materials is to process and transform them into novel composites with potential applications in various industries. This work aims to investigate the properties of composites based on silico-aluminous industrial waste (ashes) and recycled polypropylene from disposable medical face masks and to create usefulness for these materials. Polypropylene/ash composites were prepared through melt processing methods, and samples were analyzed to get a general overview of the properties of these composites. Results showed that the polypropylene recycled from face masks used together with silico-aluminous ash can be processed through industrial melt processing methods and that the addition of only 5 wt% ash with a particle size of less than 90 µm, increases the thermal stability and the stiffness of the polypropylene matrix while maintaining its mechanical strength. Further investigations are needed to find specific applications in some industrial fields.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Institute for Research & Development in Chemistry and Petrochemistry-ICECHIM, 202 Spl. Independentei, 060021 Bucharest, Romania.
- CEPROCIM S.A., 6 Preciziei, 062203 Bucharest, Romania.
ORCID-Profile: Zina Vuluga, Florin Oancea, Marius Ghiurea, Augusta Raluca Gabor, Valentin Raditoiu
Förderung
- Cohesion Fund-European Union
- POC-A1-A1.2.3-G-2015- P_40_352SECVENT
- European Union
Zitieren
APA
Teodorescu, G. M., Vuluga, Z., Oancea, F., Ionita, A., Paceagiu, J., Ghiurea, M., Nicolae, C. A., Gabor, A. R., & Raditoiu, V. (2023). Properties of Composites Based on Recycled Polypropylene and Silico-Aluminous Industrial Waste. Polymers, 15(11), 2545. https://doi.org/10.3390/polym15112545
Vancouver
Teodorescu GM, Vuluga Z, Oancea F, Ionita A, Paceagiu J, Ghiurea M, et al. Properties of Composites Based on Recycled Polypropylene and Silico-Aluminous Industrial Waste. Polymers. 2023;15(11):2545. doi:10.3390/polym15112545
BibTeX
@article{Teodorescu2023,
author = {Teodorescu, George-Mihail and Vuluga, Zina and Oancea, Florin and Ionita, Andreea and Paceagiu, Jenica and Ghiurea, Marius and Nicolae, Cristian-Andi and Gabor, Augusta Raluca and Raditoiu, Valentin},
title = {Properties of Composites Based on Recycled Polypropylene and Silico-Aluminous Industrial Waste},
journal = {Polymers},
year = {2023},
volume = {15},
number = {11},
pages = {2545},
doi = {10.3390/polym15112545}
}
EUVIMED