EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications

Rui F Martins iD, Ricardo Branco iD, Miguel Martins, Wojciech Macek iD, Zbigniew Marciniak iD, Rui Silva iD, Daniela Trindade iD, Carla Moura iD, Margarida Franco iD, Cândida Malça iD

Polymers · 29.06.2024 · 16 (13) · 1868

DOI: 10.3390/polym16131868 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.06.2024. Verfasst von Rui F Martins und 9 weiteren Autor:innen. Beteiligte Einrichtung: UNIDEMI, Department of Mechanical and Industrial Engineering, Nova School of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica,…. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gdańsk University of Technology, Fundação para a Ciência e Tecnologia, Fundação para a Ciência e a Tecnologia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study presented herein concerns the mechanical properties of two common polymers for potential biomedical applications, PLA and PETG, processed through fused filament fabrication (FFF)—Material Extrusion (ME). For the uniaxial tension tests carried out, two printing orientations—XY (Horizontal, H) and YZ (Vertical, V)—were considered according to the general principles for part positioning, coordinates, and orientation typically used in additive manufacturing (AM). In addition, six specimens were tested for each printing orientation and material, providing insights into mechanical properties such as Tensile Strength, Young’s Modulus, and Ultimate Strain, suggesting the materials’ potential for biomedical applications. The experimental results were then compared with correspondent mechanical properties obtained from the literature for other polymers like ASA, PC, PP, ULTEM 9085, Copolyester, and Nylon. Thereafter, fatigue resistance curves (S-N curves) for PLA and PETG, printed along 45°, were determined at room temperature for a load ratio, R, of 0.2. Scanning electron microscope observations revealed fibre arrangements, compression/adhesion between layers, and fracture zones, shedding light on the failure mechanisms involved in the fatigue crack propagation of such materials and giving design reference values for future applications. In addition, fractographic analyses of the fatigue fracture surfaces were carried out, as well as X-ray Computed Tomography (XCT) and Thermogravimetric (TGA)/Differential Scanning Calorimetric (DSC) tests.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiomechanicalfatigue resistancematerial extrusionmechanical propertiespolymers

Autor:innen und Institutionen

  • UNIDEMI, Department of Mechanical and Industrial Engineering, Nova School of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica, Portugal.
  • Laboratório Associado de Sistemas Inteligentes, LASI, 4800-058 Guimarães, Portugal.
  • Department of Mechanical Engineering, CEMMPRE, ARISE, University of Coimbra, Rua Luís Reis Santos, Pinhal de Marrocos, 3030-788 Coimbra, Portugal.
  • Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland.
  • Department of Mechanics and Machine Design, Opole University of Technology, Mikołajczyka 5, 45-271 Opole, Poland.
  • Centre for Rapid and Sustainable Product Development, CDRSP, Polytechnic of Leiria, Rua de Portugal, 2430-028 Marinha Grande, Portugal.

ORCID-Profile: Rui F Martins, Ricardo Branco, Wojciech Macek, Zbigniew Marciniak, Rui Silva, Daniela Trindade, Carla Moura, Margarida Franco, Cândida Malça

Förderung

  • Gdańsk University of Technology
  • Fundação para a Ciência e Tecnologia
  • Fundação para a Ciência e a Tecnologia
  • CEMMPRE projects
  • CDRSP projects
  • GDAŃSK TECH CORE EDU FACILITIES

Zitieren

APA

Martins, R. F., Branco, R., Martins, M., Macek, W., Marciniak, Z., Silva, R., Trindade, D., Moura, C., Franco, M., & Malça, C. (2024). Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications. Polymers, 16(13), 1868. https://doi.org/10.3390/polym16131868

Vancouver

Martins RF, Branco R, Martins M, Macek W, Marciniak Z, Silva R, et al. Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications. Polymers. 2024;16(13):1868. doi:10.3390/polym16131868

BibTeX
@article{Martins2024,
  author = {Martins, Rui F and Branco, Ricardo and Martins, Miguel and Macek, Wojciech and Marciniak, Zbigniew and Silva, Rui and Trindade, Daniela and Moura, Carla and Franco, Margarida and Malça, Cândida},
  title = {Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1868},
  doi = {10.3390/polym16131868}
}
Kostenlos starten →