Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing
Polymers · 27.06.2024 · 16 (13) · 1828
DOI: 10.3390/polym16131828 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.06.2024. Verfasst von Md Zahirul Islam und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, College of Engineering, North Dakota State University (NDSU), Dept 2490, P.O. Box 6050, Fargo, ND 58108, USA. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Army Research Laboratory.
Abstract (Originalsprache)
Continuous carbon fiber-reinforced (CCFR) thermoset composites have received significant attention due to their excellent mechanical and thermal properties. The implementation of 3D printing introduces cost-effectiveness and design flexibility into their manufacturing processes. The light-assisted 3D printing process shows promise for manufacturing CCFR composites using low-viscosity thermoset resin, which would otherwise be unprintable. Because of the lack of shape-retaining capability, 3D printing of various shapes is challenging with low-viscosity thermoset resin. This study demonstrated an overshoot-associated algorithm for 3D printing various shapes using low-viscosity thermoset resin and continuous carbon fiber. Additionally, 3D-printed unidirectional composites were mechanically characterized. The printed specimen exhibited tensile strength of 390 ± 22 MPa and an interlaminar strength of 38 ± 1.7 MPa, with a fiber volume fraction of 15.7 ± 0.43%. Void analysis revealed that the printed specimen contained 5.5% overall voids. Moreover, the analysis showed the presence of numerous irregular cylindrical-shaped intra-tow voids, which governed the tensile properties. However, the inter-tow voids were small and spherical-shaped, governing the interlaminar shear strength. Therefore, the printed specimens showed exceptional interlaminar shear strength, and the tensile strength had the potential to increase further by improving the impregnation of polymer resin within the fiber.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, College of Engineering, North Dakota State University (NDSU), Dept 2490, P.O. Box 6050, Fargo, ND 58108, USA.
- Combat Capabilities Development Command Army Research Laboratory, FCDD-RLW-MD, Aberdeen, MD 57401, USA.
ORCID-Profile: Md Atikur Rahman, Chad A Ulven
Förderung
- Army Research Laboratory
Zitieren
APA
Islam, M. Z., Rahman, M. A., Gibbon, L., Hall, E., Ulven, C. A., & La Scala, J. J. (2024). Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing. Polymers, 16(13), 1828. https://doi.org/10.3390/polym16131828
Vancouver
Islam MZ, Rahman MA, Gibbon L, Hall E, Ulven CA, La Scala JJ. Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing. Polymers. 2024;16(13):1828. doi:10.3390/polym16131828
BibTeX
@article{Islam2024,
author = {Islam, Md Zahirul and Rahman, Md Atikur and Gibbon, Luke and Hall, Eric and Ulven, Chad A and La Scala, John J},
title = {Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing},
journal = {Polymers},
year = {2024},
volume = {16},
number = {13},
pages = {1828},
doi = {10.3390/polym16131828}
}
EUVIMED