EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement

Md Atikur Rahman iD, Eric Hall iD, Luke Gibbon, Md Zahirul Islam, Chad A Ulven iD, John J La Scala

Polymers · 10.03.2023 · 15 (6) · 1384

DOI: 10.3390/polym15061384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.03.2023. Verfasst von Md Atikur Rahman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, College of Engineering, North Dakota State University, NDSU Dept 2490, P.O. Box 6050, Fargo, ND 58108, USA. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Army Research Laboratory, Combat Capabilities Development Command Army Research Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) is one of the fastest-growing manufacturing technologies in modern times. One of the major challenges in the application of 3D-printed polymeric objects is expanding the applications to structural components, as they are often limited by their mechanical and thermal properties. To enhance the mechanical properties of 3D-printed thermoset polymer objects, reinforcing the polymer with continuous carbon fiber (CF) tow is an expanding direction of research and development. A 3D printer was constructed capable of printing with a continuous CF-reinforced dual curable thermoset resin system. Mechanical performance of the 3D-printed composites varied with the utilization of different resin chemistries. Three different commercially available violet light curable resins were mixed with a thermal initiator to improve curing by overcoming the shadowing effect of violet light by the CF. The resulting specimens’ compositions were analyzed, and then the specimens were mechanically characterized for comparison in tensile and flexural performance. The 3D-printed composites’ compositions were correlated to the printing parameters and resin characteristics. Slight enhancements in tensile and flexural properties from some commercially available resins over others appeared to be the result of better wet-out and adhesion.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingcarbon fibercontinuous fiber-reinforced compositescontinuous fiber-reinforced thermoset 3D printingdual cured compositesmechanical propertiesphoto curable resinthermoset resin

Autor:innen und Institutionen

  • Mechanical Engineering Department, College of Engineering, North Dakota State University, NDSU Dept 2490, P.O. Box 6050, Fargo, ND 58108, USA.
  • Combat Capabilities Development Command Army Research Laboratory, FCDD-RLW-MD, Aberdeen, MD 57401, USA.

ORCID-Profile: Md Atikur Rahman, Eric Hall, Chad A Ulven

Förderung

  • United States Army Research Laboratory
  • Combat Capabilities Development Command Army Research Laboratory

Zitieren

APA

Rahman, M. A., Hall, E., Gibbon, L., Islam, M. Z., Ulven, C. A., & La Scala, J. J. (2023). A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement. Polymers, 15(6), 1384. https://doi.org/10.3390/polym15061384

Vancouver

Rahman MA, Hall E, Gibbon L, Islam MZ, Ulven CA, La Scala JJ. A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement. Polymers. 2023;15(6):1384. doi:10.3390/polym15061384

BibTeX
@article{Rahman2023,
  author = {Rahman, Md Atikur and Hall, Eric and Gibbon, Luke and Islam, Md Zahirul and Ulven, Chad A and La Scala, John J},
  title = {A Mechanical Performance Study of Dual Cured Thermoset Resin Systems 3D-Printed with Continuous Carbon Fiber Reinforcement},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1384},
  doi = {10.3390/polym15061384}
}
Kostenlos starten →