EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adjustment of Mechanical Properties of 3D Printed Continuous Carbon Fiber-Reinforced Thermoset Composites by Print Parameter Adjustments

Md Atikur Rahman iD, Luke Gibbon iD, Md Zahirul Islam, Eric Hall, Chad A Ulven iD

Polymers · 25.10.2024 · 16 (21) · 2996

DOI: 10.3390/polym16212996 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.10.2024. Verfasst von Md Atikur Rahman und 4 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, College of Engineering, North Dakota State University, Fargo, ND 58108, USA. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DEVCOM Army Research Laboratory, Combat Capabilities Development Command Army Research Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reinforcing thermoset polymers with continuous carbon fiber (CF) tow has emerged as a promising avenue to overcome the thermal and mechanical performance limitations of 3D printed polymeric structures for load-bearing applications. Unlike traditional methods, manufacturing continuous fiber-reinforced composites by 3D printing has the unique capability of locally varying the mechanical properties of the composites. In this study, continuous CF thermoset composite specimens were printed with varying line spacing, resin flow rate, and nozzle sizes. The resin flow rates for different line spacings and nozzle sizes were optimized by topographic analysis. Printed composite mechanical properties were evaluated, and their trends were correlated with the trend of print parameter changes. Results showed that tensile strength and modulus could be altered and improved by ~50% by adjusting the printing process parameters. Higher composite strength and modulus were obtained by shortening the line spacing and nozzle diameter.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingcarbon fibercomposite mechanical property adjustmentcontinuous fiber-reinforced compositesdual cured compositesphoto curable resin

Autor:innen und Institutionen

  • Mechanical Engineering Department, College of Engineering, North Dakota State University, Fargo, ND 58108, USA.

ORCID-Profile: Md Atikur Rahman, Luke Gibbon, Chad A Ulven

Förderung

  • DEVCOM Army Research Laboratory
  • Combat Capabilities Development Command Army Research Laboratory

Zitieren

APA

Rahman, M. A., Gibbon, L., Islam, M. Z., Hall, E., & Ulven, C. A. (2024). Adjustment of Mechanical Properties of 3D Printed Continuous Carbon Fiber-Reinforced Thermoset Composites by Print Parameter Adjustments. Polymers, 16(21), 2996. https://doi.org/10.3390/polym16212996

Vancouver

Rahman MA, Gibbon L, Islam MZ, Hall E, Ulven CA. Adjustment of Mechanical Properties of 3D Printed Continuous Carbon Fiber-Reinforced Thermoset Composites by Print Parameter Adjustments. Polymers. 2024;16(21):2996. doi:10.3390/polym16212996

BibTeX
@article{Rahman2024,
  author = {Rahman, Md Atikur and Gibbon, Luke and Islam, Md Zahirul and Hall, Eric and Ulven, Chad A},
  title = {Adjustment of Mechanical Properties of 3D Printed Continuous Carbon Fiber-Reinforced Thermoset Composites by Print Parameter Adjustments},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {21},
  pages = {2996},
  doi = {10.3390/polym16212996}
}
Kostenlos starten →