EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding

Sara Díaz iD, Francisco Romero, Luis Suárez iD, Raúl Ríos, Monserrat Alemán, Marianna Venuleo iD, Zaida Ortega iD

Polymers · 2024-06-26 · 16 (13) · 1807

DOI: 10.3390/polym16131807 ↗

At a glance

Journal article in Polymers, published online on 2024-06-26. Written by Sara Díaz and 6 co-authors. Institution: Departamento de Ingeniería de Procesos, Universidad de Las Palmas de Gran Canaria, Edificio de Fabricación Integrada, Parque Científico-Tecnológico d…. Cited 15 times so far (Crossref); 87 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Union, Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias, The Ministry of Universities of Spain.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The wide range of applications and the numerous advantages of plastics have led to their excessive use, with subsequent damage to ecosystems. As an environmentally friendly alternative, biocomposites have gained much attention, and microalgae have become a potential source for their production. In this study, the use of washed and unwashed Spirulina in polyethylene-based composites has been evaluated as a way to prevent the thermooxidation of polyethylene, while at the same time, reducing the amount of virgin plastic used. Biocomposites were produced by rotomolding, testing different biomass contents and determining their mechanical and thermal performances as well as their water uptake level. Composites with up to 15% of biomass (by weight), a particularly high ratio for rotomolding, were satisfactorily produced. Using 5% of both biomasses did not significantly modify the behavior when compared with the neat PE samples’ properties. For higher loadings, the use of non-washed biomass allowed us to obtain better properties, with added benefits related to using an unwashed biomass (less water consumption, lower costs and fewer environmental impacts). On the other hand, this study showed a promising beneficial effect on the thermooxidative resistance of composites, as the oxidation induction times were notably increased with biomass addition.

Subjects

Author keywords

Spirulinaantioxidantbiocompositemicroalgaerotomolding

Authors and institutions

  • Departamento de Ingeniería de Procesos, Universidad de Las Palmas de Gran Canaria, Edificio de Fabricación Integrada, Parque Científico-Tecnológico de la ULPGC, Campus Universitario de Tafira Baja, 35017 Las Palmas de G…
  • Instituto Tecnológico de Canarias (ITC), Playa de Pozo Izquierdo, s/n, 35119 Santa Lucía, Las Palmas, Spain.

ORCID profiles: Sara Díaz, Luis Suárez, Marianna Venuleo, Zaida Ortega

Funding

  • European Union
  • Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias
  • The Ministry of Universities of Spain
  • Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias a través de Fondo Europeo de Desarrollo Regional

Cite

APA

Díaz, S., Romero, F., Suárez, L., Ríos, R., Alemán, M., Venuleo, M., & Ortega, Z. (2024). Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding. Polymers, 16(13), 1807. https://doi.org/10.3390/polym16131807

Vancouver

Díaz S, Romero F, Suárez L, Ríos R, Alemán M, Venuleo M, et al. Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding. Polymers. 2024;16(13):1807. doi:10.3390/polym16131807

BibTeX
@article{Daz2024,
  author = {Díaz, Sara and Romero, Francisco and Suárez, Luis and Ríos, Raúl and Alemán, Monserrat and Venuleo, Marianna and Ortega, Zaida},
  title = {Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1807},
  doi = {10.3390/polym16131807}
}
Start for free →