EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass

Ada Pacheco iD, Arian Evangelista-Osorio iD, Katherine Gabriela Muchaypiña-Flores, Luis Alejandro Marzano-Barreda iD, Perla Paredes-Concepción iD, Heidy Palacin-Baldeón iD, Maicon Sérgio Nascimento Dos Santos, Marcus Vinícius Tres iD, Giovani Leone Zabot iD, Luis Olivera-Montenegro iD

Polymers · 10.10.2023 · 15 (20) · 4046

DOI: 10.3390/polym15204046 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 10.10.2023. Verfasst von Ada Pacheco und 9 weiteren Autor:innen. Beteiligte Einrichtung: Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 219 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This review presents the advances in polymeric materials achieved by extrusion and injection molding from lignocellulosic agroindustrial biomass. Biomass, which is derived from agricultural and industrial waste, is a renewable and abundant feedstock that contains mainly cellulose, hemicellulose, and lignin. To improve the properties and functions of polymeric materials, cellulose is subjected to a variety of modifications. The most common modifications are surface modification, grafting, chemical procedures, and molecule chemical grafting. Injection molding and extrusion technologies are crucial in shaping and manufacturing polymer composites, with precise control over the process and material selection. Furthermore, injection molding involves four phases: plasticization, injection, cooling, and ejection, with a focus on energy efficiency. Fundamental aspects of an injection molding machine, such as the motor, hopper, heating units, nozzle, and clamping unit, are discussed. Extrusion technology, commonly used as a preliminary step to injection molding, presents challenges regarding fiber reinforcement and stress accumulation, while lignin-based polymeric materials are challenging due to their hydrophobicity. The diverse applications of these biodegradable materials include automotive industries, construction, food packaging, and various consumer goods. Polymeric materials are positioned to offer even bigger contributions to sustainable and eco-friendly solutions in the future, as research and development continues.

Schlagwörter

Stichwörter der Autor:innen

agroindustrial wastesbiomaterialscelluloselignocellulosic biomass

Autor:innen und Institutionen

  • Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru.
  • Grupo de Ciencia, Tecnología e Innovación en Alimentos, Universidad San Ignacio de Loyola, La Molina 15024, Peru.
  • Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria, 1040 Sete de Setembro St., Center DC, Cachoeira do Sul, Santa Maria 96508-010, RS, Brazil.

ORCID-Profile: Ada Pacheco, Arian Evangelista-Osorio, Luis Alejandro Marzano-Barreda, Perla Paredes-Concepción, Heidy Palacin-Baldeón, Marcus Vinícius Tres, Giovani Leone Zabot, Luis Olivera-Montenegro

Zitieren

APA

Pacheco, A., Evangelista-Osorio, A., Muchaypiña-Flores, K. G., Marzano-Barreda, L. A., Paredes-Concepción, P., Palacin-Baldeón, H., Dos Santos, M. S. N., Tres, M. V., Zabot, G. L., & Olivera-Montenegro, L. (2023). Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass. Polymers, 15(20), 4046. https://doi.org/10.3390/polym15204046

Vancouver

Pacheco A, Evangelista-Osorio A, Muchaypiña-Flores KG, Marzano-Barreda LA, Paredes-Concepción P, Palacin-Baldeón H, et al. Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass. Polymers. 2023;15(20):4046. doi:10.3390/polym15204046

BibTeX
@article{Pacheco2023,
  author = {Pacheco, Ada and Evangelista-Osorio, Arian and Muchaypiña-Flores, Katherine Gabriela and Marzano-Barreda, Luis Alejandro and Paredes-Concepción, Perla and Palacin-Baldeón, Heidy and Dos Santos, Maicon Sérgio Nascimento and Tres, Marcus Vinícius and Zabot, Giovani Leone and Olivera-Montenegro, Luis},
  title = {Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4046},
  doi = {10.3390/polym15204046}
}
Kostenlos starten →