Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding
Polymers · 26.06.2024 · 16 (13) · 1807
DOI: 10.3390/polym16131807 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2024. Verfasst von Sara Díaz und 6 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería de Procesos, Universidad de Las Palmas de Gran Canaria, Edificio de Fabricación Integrada, Parque Científico-Tecnológico d…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias, The Ministry of Universities of Spain.
Abstract (Originalsprache)
The wide range of applications and the numerous advantages of plastics have led to their excessive use, with subsequent damage to ecosystems. As an environmentally friendly alternative, biocomposites have gained much attention, and microalgae have become a potential source for their production. In this study, the use of washed and unwashed Spirulina in polyethylene-based composites has been evaluated as a way to prevent the thermooxidation of polyethylene, while at the same time, reducing the amount of virgin plastic used. Biocomposites were produced by rotomolding, testing different biomass contents and determining their mechanical and thermal performances as well as their water uptake level. Composites with up to 15% of biomass (by weight), a particularly high ratio for rotomolding, were satisfactorily produced. Using 5% of both biomasses did not significantly modify the behavior when compared with the neat PE samples’ properties. For higher loadings, the use of non-washed biomass allowed us to obtain better properties, with added benefits related to using an unwashed biomass (less water consumption, lower costs and fewer environmental impacts). On the other hand, this study showed a promising beneficial effect on the thermooxidative resistance of composites, as the oxidation induction times were notably increased with biomass addition.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Ingeniería de Procesos, Universidad de Las Palmas de Gran Canaria, Edificio de Fabricación Integrada, Parque Científico-Tecnológico de la ULPGC, Campus Universitario de Tafira Baja, 35017 Las Palmas de G…
- Instituto Tecnológico de Canarias (ITC), Playa de Pozo Izquierdo, s/n, 35119 Santa Lucía, Las Palmas, Spain.
ORCID-Profile: Sara Díaz, Luis Suárez, Marianna Venuleo, Zaida Ortega
Förderung
- European Union
- Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias
- The Ministry of Universities of Spain
- Consejería de Economía, Conocimiento y Empleo del Gobierno de Canarias a través de Fondo Europeo de Desarrollo Regional
Zitieren
APA
Díaz, S., Romero, F., Suárez, L., Ríos, R., Alemán, M., Venuleo, M., & Ortega, Z. (2024). Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding. Polymers, 16(13), 1807. https://doi.org/10.3390/polym16131807
Vancouver
Díaz S, Romero F, Suárez L, Ríos R, Alemán M, Venuleo M, et al. Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding. Polymers. 2024;16(13):1807. doi:10.3390/polym16131807
BibTeX
@article{Daz2024,
author = {Díaz, Sara and Romero, Francisco and Suárez, Luis and Ríos, Raúl and Alemán, Monserrat and Venuleo, Marianna and Ortega, Zaida},
title = {Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding},
journal = {Polymers},
year = {2024},
volume = {16},
number = {13},
pages = {1807},
doi = {10.3390/polym16131807}
}
EUVIMED