Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites
Polymers · 10.06.2024 · 16 (12) · 1641
DOI: 10.3390/polym16121641 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.06.2024. Verfasst von Feng Xu und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Project of the Silk Road Economic Belt Innovation-Driven Development Pilot Zone and the Science and Technology Development Plan of Wuchangshi National Independ….
Abstract (Originalsprache)
Different chemical treatment methods were employed to modify the surface of cotton stalk fibers, which were then utilized as fillers in composite materials. These treated fibers were incorporated into polylactic acid/polypropylene melt blends using the melt blending technique. Results indicated that increasing the surface roughness of cotton stalk fibers could enhance the overall mechanical properties of the composite materials, albeit potentially leading to poor fiber–matrix compatibility. Conversely, a smooth fiber surface was found to improve compatibility with polylactic acid, while Si-O-C silane coating increased fiber regularity and interfacial interaction with the matrix, thereby enhancing heat resistance. The mechanical properties and thermal stability of the composite materials made from alkali/silane-treated fibers exhibited the most significant improvement. Furthermore, better dispersion of fibers in the matrix and more regular fiber orientation were conducive to increasing the overall crystallinity of the composite materials. However, such fiber distribution was not favorable for enhancing impact resistance, although this drawback could be mitigated by increasing the surface roughness of the reinforcing fibers.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China.
- State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, State Key Laboratory of Oil and Gas Fine Chemicals, Ministry of Education & Xinjiang Uygur Autonomous Region, Xinjiang University, Urum…
ORCID-Profile: Feng Xu, Ruxangul Jamal, Tursun Abdiryim
Förderung
- National Natural Science Foundation of China
- Project of the Silk Road Economic Belt Innovation-Driven Development Pilot Zone and the Science and Technology Development Plan of Wuchangshi National Independ…
Zitieren
APA
Xu, F., Shang, J., Abdurexit, A., Jamal, R., Abdiryim, T., Li, Z., You, J., Wei, J., Su, E., & Huang, L. (2024). Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites. Polymers, 16(12), 1641. https://doi.org/10.3390/polym16121641
Vancouver
Xu F, Shang J, Abdurexit A, Jamal R, Abdiryim T, Li Z, et al. Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites. Polymers. 2024;16(12):1641. doi:10.3390/polym16121641
BibTeX
@article{Xu2024,
author = {Xu, Feng and Shang, Jin and Abdurexit, Abdukeyum and Jamal, Ruxangul and Abdiryim, Tursun and Li, Zhiwei and You, Jiangan and Wei, Jin and Su, Erman and Huang, Longjiang},
title = {Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites},
journal = {Polymers},
year = {2024},
volume = {16},
number = {12},
pages = {1641},
doi = {10.3390/polym16121641}
}
EUVIMED