EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Mechanical Properties of 3D-Printed PLA Composites Reinforced with Natural Fibers: A Comparative Study

Nisakorn Somsuk, Supaaek Pramoonmak, Boonsong Chongkolnee, Ponlapath Tipboonsri, Anin Memon

Journal of Composites Science · 08.04.2025 · 9 (4) · 180

DOI: 10.3390/jcs9040180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 08.04.2025. Verfasst von Nisakorn Somsuk und 4 weiteren Autor:innen. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic acid (PLA) is widely used in 3D printing for its biodegradability and ease of processing, but its brittleness and low impact strength often restrict its suitability for more demanding applications. The novelty of this work lies in its direct comparative approach: we systematically reinforce PLA with two distinct agricultural residues—rice husk and rice straw—under identical conditions to clarify how particle size (100 vs. 200 mesh) and NaOH surface treatment affect mechanical performance. Composite filaments containing 5–20 wt% of each fiber were produced and 3D-printed into standard tensile and flexural specimens. The results show that, although tensile strength declines at higher fiber loadings, tensile modulus, flexural strength, and impact resistance can improve significantly—particularly with 200-mesh and NaOH-treated fibers. Fourier transform infrared (FTIR) spectroscopy confirms partial lignin removal and enhanced cellulose exposure, improving fiber–matrix adhesion, which is corroborated by scanning electron microscopy (SEM) observations of reduced voids. This comparative study demonstrates that surface-treated, finely milled rice husk and rice straw significantly enhance PLA’s stiffness and toughness, offering a sustainable alternative to conventional polymeric additives. The insights gained here on fiber content, chemical treatment, and 3D printing parameters can guide the broader industrial adoption of these natural fiber-reinforced PLA composites, particularly in automotive and construction applications that require lightweight, durable materials.

Zitieren

APA

Somsuk, N., Pramoonmak, S., Chongkolnee, B., Tipboonsri, P., & Memon, A. (2025). Enhancing Mechanical Properties of 3D-Printed PLA Composites Reinforced with Natural Fibers: A Comparative Study. Journal of Composites Science, 9(4), 180. https://doi.org/10.3390/jcs9040180

Vancouver

Somsuk N, Pramoonmak S, Chongkolnee B, Tipboonsri P, Memon A. Enhancing Mechanical Properties of 3D-Printed PLA Composites Reinforced with Natural Fibers: A Comparative Study. Journal of Composites Science. 2025;9(4):180. doi:10.3390/jcs9040180

BibTeX
@article{Somsuk2025,
  author = {Somsuk, Nisakorn and Pramoonmak, Supaaek and Chongkolnee, Boonsong and Tipboonsri, Ponlapath and Memon, Anin},
  title = {Enhancing Mechanical Properties of 3D-Printed PLA Composites Reinforced with Natural Fibers: A Comparative Study},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {4},
  pages = {180},
  doi = {10.3390/jcs9040180}
}
Kostenlos starten →