Analysis of mechanical chemical and thermal properties of PLA filaments after mechanical recycling
The International Journal of Advanced Manufacturing Technology · 2026-09 · 146 (4) · 2327-2342
DOI: 10.1007/s00170-026-18921-w ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 13.08.2026. Verfasst von Mahsa Shabani und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Clemson University.
Abstract (Originalsprache)
Polylactic acid (PLA) is one of the most widely used materials in fused deposition modeling (FDM); however, failed prints and support structures generate considerable plastic waste. Mechanical recycling provides an environmentally friendly route for reusing this waste, but repeated recycling may degrade material performance. In this study, a practical mechanical recycling process suitable for home users and small-scale applications was developed and evaluated over successive recycling generations without the addition of virgin PLA. Recycled filaments were characterized using tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results showed that PLA could be successfully recycled and reprinted for up to three generations, although printability deteriorated after the third recycling cycle. Mechanical testing revealed reductions in ultimate tensile strength, strain at break, and Young’s modulus, indicating progressive material degradation. FTIR analysis showed that the chemical structure of PLA was largely preserved while crystallinity decreased with repeated recycling. Thermal analysis further confirmed degradation associated with successive recycling. These findings demonstrate the practical limitations of repeated mechanical recycling of PLA and provide guidance for improving sustainable recycling practices in small-scale additive manufacturing.
Förderung
- Clemson University
Zitieren
APA
Shabani, M., & Turner, C. J. (2026). Analysis of mechanical chemical and thermal properties of PLA filaments after mechanical recycling. The International Journal of Advanced Manufacturing Technology, 146(4), 2327-2342. https://doi.org/10.1007/s00170-026-18921-w
Vancouver
Shabani M, Turner CJ. Analysis of mechanical chemical and thermal properties of PLA filaments after mechanical recycling. The International Journal of Advanced Manufacturing Technology. 2026;146(4):2327-2342. doi:10.1007/s00170-026-18921-w
BibTeX
@article{Shabani2026,
author = {Shabani, Mahsa and Turner, Cameron J},
title = {Analysis of mechanical chemical and thermal properties of PLA filaments after mechanical recycling},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {146},
number = {4},
pages = {2327--2342},
doi = {10.1007/s00170-026-18921-w}
}
EUVIMED