Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems
Bioengineering · 11.07.2024 · 11 (7) · 705
DOI: 10.3390/bioengineering11070705 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 11.07.2024. Verfasst von Allan John R Barcena und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Interventional Radiology, The University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 149 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Poly(lactic acid) (PLA) is widely used in the field of medicine due to its biocompatibility, versatility, and cost-effectiveness. Three-dimensional (3D) printing or the systematic deposition of PLA in layers has enabled the fabrication of customized scaffolds for various biomedical and clinical applications. In tissue engineering and regenerative medicine, 3D-printed PLA has been mostly used to generate bone tissue scaffolds, typically in combination with different polymers and ceramics. PLA’s versatility has also allowed the development of drug-eluting constructs for the controlled release of various agents, such as antibiotics, antivirals, anti-hypertensives, chemotherapeutics, hormones, and vitamins. Additionally, 3D-printed PLA has recently been used to develop diagnostic electrodes, prostheses, orthoses, surgical instruments, and radiotherapy devices. PLA has provided a cost-effective, accessible, and safer means of improving patient care through surgical and dosimetry guides, as well as enhancing medical education through training models and simulators. Overall, the widespread use of 3D-printed PLA in biomedical and clinical settings is expected to persistently stimulate biomedical innovation and revolutionize patient care and healthcare delivery.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Interventional Radiology, The University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA.
- College of Medicine, University of the Philippines Manila, Manila 1000, Philippines.
- Department of Radiology, University of Cincinnati, Cincinnati, OH 45219, USA.
- Department of Biostatistics, Division of Basic Science Research, The University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA.
- Department of Breast Imaging, Division of Diagnostic Imaging, The University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA.
ORCID-Profile: Allan John R Barcena, Karthik Tappa
Zitieren
APA
Barcena, A. J. R., Ravi, P., Kundu, S., & Tappa, K. (2024). Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems. Bioengineering, 11(7), 705. https://doi.org/10.3390/bioengineering11070705
Vancouver
Barcena AJR, Ravi P, Kundu S, Tappa K. Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems. Bioengineering. 2024;11(7):705. doi:10.3390/bioengineering11070705
BibTeX
@article{Barcena2024,
author = {Barcena, Allan John R and Ravi, Prashanth and Kundu, Suprateek and Tappa, Karthik},
title = {Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems},
journal = {Bioengineering},
year = {2024},
volume = {11},
number = {7},
pages = {705},
doi = {10.3390/bioengineering11070705}
}
EUVIMED