Valorization of Tomato Stem Waste: Biochar as a Filler in Three-Dimensional Printed PLA Composites
Polymers · 23.09.2025 · 17 (19) · 2565
DOI: 10.3390/polym17192565 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.09.2025. Verfasst von Dimitrios Gkiliopoulos und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Research and Technology Hellas, Information Technologies Institute, 6th km Charilaou-Thermi Road, 57001 Thessaloniki, Greece. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon Europe, Horizon Europe CircSyst project.
Abstract (Originalsprache)
This study explores the valorization of tomato stem waste by converting it into biochar through slow pyrolysis and incorporating it into poly(lactic acid) (PLA) composites for fused filament fabrication (FFF) 3D printing. The objective was to improve the valorization and added value of tomato stem waste. Biochar derived from tomato stems was characterized for its physicochemical properties, revealing a high surface area and small particle size. PLA-based composite filaments with 5% and 7.5% biochar were manufactured via melt extrusion. The effects of biochar concentration and printing infill patterns (concentric and rectilinear) on the mechanical and thermomechanical properties of the 3D-printed composites were investigated. Results indicated that biochar slightly increased the glass transition temperature of PLA and improved the flexural properties. Dynamic mechanical analysis (DMA) showed that the storage modulus was enhanced in the glassy region for composites with 5% biochar, suggesting improved stiffness. This research demonstrates the potential of using tomato stem-derived biochar as a sustainable filler in PLA composites, contributing to the circular economy and reducing environmental impact.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Research and Technology Hellas, Information Technologies Institute, 6th km Charilaou-Thermi Road, 57001 Thessaloniki, Greece.
- Laboratory of Chemical and Environmental Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
- Interdisciplinary Research Center for Refining and Advanced Chemicals, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
- Chemistry Department, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.
- Laboratory of Chemistry and Technology of Polymers and Colors, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
- Laboratory of Industrial Chemistry, Department of Chemistry, University of Ioannina, 45110 Ioannina, Greece.
ORCID-Profile: Dimitrios Gkiliopoulos, Sotirios Pemas, Stylianos Torofias, Konstantinos Triantafyllidis, Dimitrios N Bikiaris, Zoi Terzopoulou, Eleftheria Maria Pechlivani
Förderung
- Horizon Europe
- Horizon Europe CircSyst project
Zitieren
APA
Gkiliopoulos, D., Pemas, S., Torofias, S., Triantafyllidis, K., Bikiaris, D. N., Terzopoulou, Z., & Pechlivani, E. M. (2025). Valorization of Tomato Stem Waste: Biochar as a Filler in Three-Dimensional Printed PLA Composites. Polymers, 17(19), 2565. https://doi.org/10.3390/polym17192565
Vancouver
Gkiliopoulos D, Pemas S, Torofias S, Triantafyllidis K, Bikiaris DN, Terzopoulou Z, et al. Valorization of Tomato Stem Waste: Biochar as a Filler in Three-Dimensional Printed PLA Composites. Polymers. 2025;17(19):2565. doi:10.3390/polym17192565
BibTeX
@article{Gkiliopoulos2025,
author = {Gkiliopoulos, Dimitrios and Pemas, Sotirios and Torofias, Stylianos and Triantafyllidis, Konstantinos and Bikiaris, Dimitrios N and Terzopoulou, Zoi and Pechlivani, Eleftheria Maria},
title = {Valorization of Tomato Stem Waste: Biochar as a Filler in Three-Dimensional Printed PLA Composites},
journal = {Polymers},
year = {2025},
volume = {17},
number = {19},
pages = {2565},
doi = {10.3390/polym17192565}
}
EUVIMED