EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration

Hosein Emadi, Mostafa Baghani iD, Maryam Masoudi Rad, Bahareh Hoomehr iD, Majid Baniassadi, Saeid Lotfian iD

Polymers · 2024-05-13 · 16 (10) · 1389

DOI: 10.3390/polym16101389 ↗

At a glance

Journal article in Polymers, published online on 2024-05-13. Written by Hosein Emadi and 5 co-authors. Institution: School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 14176-14411, Iran. Cited 17 times so far (Crossref); 67 references. The full text is freely available (open access, CC BY 4.0).

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

There is an essential clinical need to develop rapid process scaffolds to repair bone defects. The current research presented the development of calcium zirconium silicate/polycaprolactone for bone tissue engineering utilising melt extrusion-based 3D printing. Calcium zirconium silicate (CZS) nanoparticles were added to polycaprolactone (PCL) porous scaffolds to enhance their biological and mechanical properties, while the resulting properties were studied extensively. No significant difference was found in the melting point of the samples, while the crystallisation temperature points of the samples containing bioceramic increased from 36.1 to 40.2 °C. Thermal degradation commenced around 350 °C for all materials. According to our results, increasing the CZS content from 0 to 40 wt.% (PC40) in porous scaffolds (porosity about 55–62%) improved the compressive strength from 2.8 to 10.9 MPa. Furthermore, apatite formation ability in SBF solution increased significantly by enhancing the CZS percentage. According to MTT test results, the viability of MG63 cells improved remarkably (~29%) in PC40 compared to pure PCL. These findings suggest that a 3D-printed PCL/CZS composite scaffold can be fabricated successfully and shows great potential as an implantable material for bone tissue engineering applications.

Subjects

Author keywords

PCLbioactivitycalcium zirconium silicatecytocompatibilityfused deposition modelling

Authors and institutions

  • School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 14176-14411, Iran.
  • Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
  • Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
  • Faculty of Engineering, University of Strathclyde, Glasgow G4 0LZ, UK.

ORCID profiles: Mostafa Baghani, Bahareh Hoomehr, Saeid Lotfian

Cite

APA

Emadi, H., Baghani, M., Masoudi Rad, M., Hoomehr, B., Baniassadi, M., & Lotfian, S. (2024). 3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration. Polymers, 16(10), 1389. https://doi.org/10.3390/polym16101389

Vancouver

Emadi H, Baghani M, Masoudi Rad M, Hoomehr B, Baniassadi M, Lotfian S. 3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration. Polymers. 2024;16(10):1389. doi:10.3390/polym16101389

BibTeX
@article{Emadi2024,
  author = {Emadi, Hosein and Baghani, Mostafa and Masoudi Rad, Maryam and Hoomehr, Bahareh and Baniassadi, Majid and Lotfian, Saeid},
  title = {3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {10},
  pages = {1389},
  doi = {10.3390/polym16101389}
}
Start for free →