Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor
Polymers · 2024-05-07 · 16 (10) · 1302
DOI: 10.3390/polym16101302 ↗At a glance
Journal article in Polymers, published online on 2024-05-07. Written by Saša Papuga and 3 co-authors. Institution: Faculty of Technology, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina. Cited 12 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
This paper presents the results of investigations into the pyrolysis of waste polypropylene in a laboratory fixed-bed batch reactor. The experiments were designed and verified in such a way as to allow the application of the response surface methodology (RSM) in the development of an empirical mathematical model that quantifies the impacts mentioned above. The influence of the mass of the raw material (50, 100, and 150 g) together with the reactor temperature (450, 475, and 500 °C) and the reaction time (45, 50 and 75 min) was examined. It has been shown that the mass of the raw material, i.e., the filling volume of the reactor, has a significant influence on the pyrolysis oil yield. This influence exceeds the influence of reactor temperature and reaction time. This was explained by observing the temperature change inside the reactor at three different spots at the bottom, middle, and top of the reactor. The recorded temperature diagrams show that, with greater masses of feedstock, local overheating occurs in the middle part of the reactor, which leads to the overcracking of volatile products and, from there, to an increased formation of non-condensable gases, i.e., a reduced yield of pyrolytic oil.
Subjects
Author keywords
Authors and institutions
- Faculty of Technology, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina.
- Faculty of Mechanical Engineering, University of Banja Luka, 78000 Banja Luka, Bosnia and Herzegovina.
- Department of Basic and Applied Science for Engineering, Sapienza University of Rome, I-00161 Rome, Italy.
ORCID profiles: Saša Papuga, Milica Djurdjevic, Stefano Vecchio Ciprioti
Cite
APA
Papuga, S., Savković, J., Djurdjevic, M., & Ciprioti, S. V. (2024). Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor. Polymers, 16(10), 1302. https://doi.org/10.3390/polym16101302
Vancouver
Papuga S, Savković J, Djurdjevic M, Ciprioti SV. Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor. Polymers. 2024;16(10):1302. doi:10.3390/polym16101302
BibTeX
@article{Papuga2024,
author = {Papuga, Saša and Savković, Jelena and Djurdjevic, Milica and Ciprioti, Stefano Vecchio},
title = {Effect of Feed Mass, Reactor Temperature, and Time on the Yield of Waste Polypropylene Pyrolysis Oil Produced via a Fixed-Bed Reactor},
journal = {Polymers},
year = {2024},
volume = {16},
number = {10},
pages = {1302},
doi = {10.3390/polym16101302}
}
EUVIMED